W12×170 Beam Dimensions & Properties

W Shapes (AISC) · W12: 12 in nominal depth

W12×170 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 14 in (355.6 mm) deep with a 12.6 in (320.0 mm) flange, a 0.96 in (24.4 mm) web and a 1.56 in (39.6 mm) flange, and weighs 170 lb/ft (253.0 kg/m). Area 50 in² (32,258 mm²); strong-axis Ix = 1,650 in⁴ (68,678.2 cm⁴), Sx = 235 in³ (3,851 cm³), Zx = 275 in³ (4,506.4 cm³).

dDepth
355.6 mm14 in14 in355.6 mm
bfFlange width
320.0 mm12.6 in12.6 in320.0 mm
twWeb thickness
24.4 mm0.96 in0.96 in24.4 mm
tfFlange thickness
39.6 mm1.56 in1.56 in39.6 mm

Drawing

320.0 mm12.6 in355.6 mm14 intf 39.6 mmtf 1.56 intw 24.4 mmtw 0.96 ink 54.9 mmk 2.16 in
Drawn to scale · Dimensions in mmDimensions in inches

W12×170 specifications

dDepth14 in355.6 mm
bfFlange width12.6 in320.0 mm
twWeb thickness0.96 in24.4 mm
tfFlange thickness1.56 in39.6 mm
kDesign value2.16 in54.9 mm
kDetailing value2 7/16 in61.9 mm
k1Detailing value1 5/16 in33.3 mm
WWeight170 lb/ft253.0 kg/m
AArea50 in²32,258 mm²
IxMoment of inertia, strong axis1,650 in⁴68,678.2 cm⁴
ZxPlastic modulus, strong axis275 in³4,506.4 cm³
SxSection modulus, strong axis235 in³3,851 cm³
rxRadius of gyration, strong axis5.74 in145.8 mm
IyMoment of inertia, weak axis517 in⁴21,519.2 cm⁴
ZyPlastic modulus, weak axis126 in³2,064.8 cm³
SySection modulus, weak axis82.3 in³1,348.7 cm³
ryRadius of gyration, weak axis3.22 in81.8 mm
JTorsional constant35.6 in⁴1,481.78 cm⁴
bf/2tfFlange slenderness4.03
h/twWeb slenderness10.1
Metric designationW310×253

Also known as

W310×253

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.