W40×183 Beam Dimensions & Properties

W Shapes (AISC) · W40: 40 in nominal depth

W40×183 is an AISC wide-flange shape (W40: 40 in nominal depth). It is 39 in (990.6 mm) deep with a 11.8 in (299.7 mm) flange, a 0.65 in (16.5 mm) web and a 1.2 in (30.5 mm) flange, and weighs 183 lb/ft (272.3 kg/m). Area 53.3 in² (34,387 mm²); strong-axis Ix = 13,200 in⁴ (549,425.5 cm⁴), Sx = 675 in³ (11,061.3 cm³), Zx = 774 in³ (12,683.6 cm³).

dDepth
990.6 mm39 in39 in990.6 mm
bfFlange width
299.7 mm11.8 in11.8 in299.7 mm
twWeb thickness
16.5 mm0.65 in0.65 in16.5 mm
tfFlange thickness
30.5 mm1.2 in1.2 in30.5 mm

Drawing

299.7 mm11.8 in990.6 mm39 intf 30.5 mmtf 1.2 intw 16.5 mmtw 0.65 ink 60.5 mmk 2.38 in
Drawn to scale · Dimensions in mmDimensions in inches

W40×183 specifications

dDepth39 in990.6 mm
bfFlange width11.8 in299.7 mm
twWeb thickness0.65 in16.5 mm
tfFlange thickness1.2 in30.5 mm
kDesign value2.38 in60.5 mm
kDetailing value2 1/2 in63.5 mm
k1Detailing value1 9/16 in39.7 mm
WWeight183 lb/ft272.3 kg/m
AArea53.3 in²34,387 mm²
IxMoment of inertia, strong axis13,200 in⁴549,425.5 cm⁴
ZxPlastic modulus, strong axis774 in³12,683.6 cm³
SxSection modulus, strong axis675 in³11,061.3 cm³
rxRadius of gyration, strong axis15.7 in398.8 mm
IyMoment of inertia, weak axis331 in⁴13,777.3 cm⁴
ZyPlastic modulus, weak axis88.3 in³1,447 cm³
SySection modulus, weak axis56 in³917.7 cm³
ryRadius of gyration, weak axis2.49 in63.2 mm
JTorsional constant19.3 in⁴803.33 cm⁴
bf/2tfFlange slenderness4.92
h/twWeb slenderness52.6
Metric designationW1000×272

Also known as

W1000×272

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.