W12×190 Beam Dimensions & Properties

W Shapes (AISC) · W12: 12 in nominal depth

W12×190 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 14.4 in (365.8 mm) deep with a 12.7 in (322.6 mm) flange, a 1.06 in (26.9 mm) web and a 1.74 in (44.2 mm) flange, and weighs 190 lb/ft (282.8 kg/m). Area 56 in² (36,129 mm²); strong-axis Ix = 1,890 in⁴ (78,667.7 cm⁴), Sx = 263 in³ (4,309.8 cm³), Zx = 311 in³ (5,096.4 cm³).

dDepth
365.8 mm14.4 in14.4 in365.8 mm
bfFlange width
322.6 mm12.7 in12.7 in322.6 mm
twWeb thickness
26.9 mm1.06 in1.06 in26.9 mm
tfFlange thickness
44.2 mm1.74 in1.74 in44.2 mm

Drawing

322.6 mm12.7 in365.8 mm14.4 intf 44.2 mmtf 1.74 intw 26.9 mmtw 1.06 ink 59.2 mmk 2.33 in
Drawn to scale · Dimensions in mmDimensions in inches

W12×190 specifications

dDepth14.4 in365.8 mm
bfFlange width12.7 in322.6 mm
twWeb thickness1.06 in26.9 mm
tfFlange thickness1.74 in44.2 mm
kDesign value2.33 in59.2 mm
kDetailing value2 5/8 in66.7 mm
k1Detailing value1 3/8 in34.9 mm
WWeight190 lb/ft282.8 kg/m
AArea56 in²36,129 mm²
IxMoment of inertia, strong axis1,890 in⁴78,667.7 cm⁴
ZxPlastic modulus, strong axis311 in³5,096.4 cm³
SxSection modulus, strong axis263 in³4,309.8 cm³
rxRadius of gyration, strong axis5.82 in147.8 mm
IyMoment of inertia, weak axis589 in⁴24,516 cm⁴
ZyPlastic modulus, weak axis143 in³2,343.4 cm³
SySection modulus, weak axis93 in³1,524 cm³
ryRadius of gyration, weak axis3.25 in82.6 mm
JTorsional constant48.8 in⁴2,031.21 cm⁴
bf/2tfFlange slenderness3.65
h/twWeb slenderness9.2
Metric designationW310×283

Also known as

W310×283

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.