W27×178 Beam Dimensions & Properties

W Shapes (AISC) · W27: 27 in nominal depth

W27×178 is an AISC wide-flange shape (W27: 27 in nominal depth). It is 27.8 in (706.1 mm) deep with a 14.1 in (358.1 mm) flange, a 0.725 in (18.4 mm) web and a 1.19 in (30.2 mm) flange, and weighs 178 lb/ft (264.9 kg/m). Area 52.5 in² (33,871 mm²); strong-axis Ix = 7,020 in⁴ (292,194.5 cm⁴), Sx = 505 in³ (8,275.5 cm³), Zx = 570 in³ (9,340.6 cm³).

dDepth
706.1 mm27.8 in27.8 in706.1 mm
bfFlange width
358.1 mm14.1 in14.1 in358.1 mm
twWeb thickness
18.4 mm0.725 in0.725 in18.4 mm
tfFlange thickness
30.2 mm1.19 in1.19 in30.2 mm

Drawing

358.1 mm14.1 in706.1 mm27.8 intf 30.2 mmtf 1.19 intw 18.4 mmtw 0.725 ink 50.3 mmk 1.98 in
Drawn to scale · Dimensions in mmDimensions in inches

W27×178 specifications

dDepth27.8 in706.1 mm
bfFlange width14.1 in358.1 mm
twWeb thickness0.725 in18.4 mm
tfFlange thickness1.19 in30.2 mm
kDesign value1.98 in50.3 mm
kDetailing value2 3/8 in60.3 mm
k1Detailing value1 9/16 in39.7 mm
WWeight178 lb/ft264.9 kg/m
AArea52.5 in²33,871 mm²
IxMoment of inertia, strong axis7,020 in⁴292,194.5 cm⁴
ZxPlastic modulus, strong axis570 in³9,340.6 cm³
SxSection modulus, strong axis505 in³8,275.5 cm³
rxRadius of gyration, strong axis11.6 in294.6 mm
IyMoment of inertia, weak axis555 in⁴23,100.8 cm⁴
ZyPlastic modulus, weak axis122 in³1,999.2 cm³
SySection modulus, weak axis78.8 in³1,291.3 cm³
ryRadius of gyration, weak axis3.25 in82.6 mm
JTorsional constant20.1 in⁴836.63 cm⁴
bf/2tfFlange slenderness5.92
h/twWeb slenderness32.9
Metric designationW690×265

Also known as

W690×265

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.