W36×182 Beam Dimensions & Properties
W Shapes (AISC) · W36: 36 in nominal depth
W36×182 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 36.3 in (922.0 mm) deep with a 12.1 in (307.3 mm) flange, a 0.725 in (18.4 mm) web and a 1.18 in (30.0 mm) flange, and weighs 182 lb/ft (270.8 kg/m). Area 53.6 in² (34,581 mm²); strong-axis Ix = 11,300 in⁴ (470,341.5 cm⁴), Sx = 623 in³ (10,209.1 cm³), Zx = 718 in³ (11,765.9 cm³).
- dDepth
- 922.0 mm36.3 in36.3 in922.0 mm
- bfFlange width
- 307.3 mm12.1 in12.1 in307.3 mm
- twWeb thickness
- 18.4 mm0.725 in0.725 in18.4 mm
- tfFlange thickness
- 30.0 mm1.18 in1.18 in30.0 mm
Drawing
W36×182 specifications
| dDepth | 36.3 in922.0 mm |
|---|---|
| bfFlange width | 12.1 in307.3 mm |
| twWeb thickness | 0.725 in18.4 mm |
| tfFlange thickness | 1.18 in30.0 mm |
| kDesign value | 1.93 in49.0 mm |
| kDetailing value | 2 3/8 in60.3 mm |
| k1Detailing value | 1 9/16 in39.7 mm |
| WWeight | 182 lb/ft270.8 kg/m |
| AArea | 53.6 in²34,581 mm² |
| IxMoment of inertia, strong axis | 11,300 in⁴470,341.5 cm⁴ |
| ZxPlastic modulus, strong axis | 718 in³11,765.9 cm³ |
| SxSection modulus, strong axis | 623 in³10,209.1 cm³ |
| rxRadius of gyration, strong axis | 14.5 in368.3 mm |
| IyMoment of inertia, weak axis | 347 in⁴14,443.2 cm⁴ |
| ZyPlastic modulus, weak axis | 90.7 in³1,486.3 cm³ |
| SySection modulus, weak axis | 57.6 in³943.9 cm³ |
| ryRadius of gyration, weak axis | 2.55 in64.8 mm |
| JTorsional constant | 18.5 in⁴770.03 cm⁴ |
| bf/2tfFlange slenderness | 5.12 |
| h/twWeb slenderness | 44.8 |
| Metric designation | W920×271 |
Also known as
W920×271
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.