W40×211 Beam Dimensions & Properties
W Shapes (AISC) · W40: 40 in nominal depth
W40×211 is an AISC wide-flange shape (W40: 40 in nominal depth). It is 39.4 in (1000.8 mm) deep with a 11.8 in (299.7 mm) flange, a 0.75 in (19.0 mm) web and a 1.42 in (36.1 mm) flange, and weighs 211 lb/ft (314.0 kg/m). Area 62.1 in² (40,064 mm²); strong-axis Ix = 15,500 in⁴ (645,158.7 cm⁴), Sx = 786 in³ (12,880.2 cm³), Zx = 906 in³ (14,846.7 cm³).
- dDepth
- 1000.8 mm39.4 in39.4 in1000.8 mm
- bfFlange width
- 299.7 mm11.8 in11.8 in299.7 mm
- twWeb thickness
- 19.0 mm0.75 in0.75 in19.0 mm
- tfFlange thickness
- 36.1 mm1.42 in1.42 in36.1 mm
Drawing
W40×211 specifications
| dDepth | 39.4 in1000.8 mm |
|---|---|
| bfFlange width | 11.8 in299.7 mm |
| twWeb thickness | 0.75 in19.0 mm |
| tfFlange thickness | 1.42 in36.1 mm |
| kDesign value | 2.6 in66.0 mm |
| kDetailing value | 2 11/16 in68.3 mm |
| k1Detailing value | 1 9/16 in39.7 mm |
| WWeight | 211 lb/ft314.0 kg/m |
| AArea | 62.1 in²40,064 mm² |
| IxMoment of inertia, strong axis | 15,500 in⁴645,158.7 cm⁴ |
| ZxPlastic modulus, strong axis | 906 in³14,846.7 cm³ |
| SxSection modulus, strong axis | 786 in³12,880.2 cm³ |
| rxRadius of gyration, strong axis | 15.8 in401.3 mm |
| IyMoment of inertia, weak axis | 390 in⁴16,233 cm⁴ |
| ZyPlastic modulus, weak axis | 105 in³1,720.6 cm³ |
| SySection modulus, weak axis | 66.1 in³1,083.2 cm³ |
| ryRadius of gyration, weak axis | 2.51 in63.8 mm |
| JTorsional constant | 30.4 in⁴1,265.34 cm⁴ |
| bf/2tfFlange slenderness | 4.17 |
| h/twWeb slenderness | 45.6 |
| Metric designation | W1000×314 |
Also known as
W1000×314
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.