W12×210 Beam Dimensions & Properties

W Shapes (AISC) · W12: 12 in nominal depth

W12×210 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 14.7 in (373.4 mm) deep with a 12.8 in (325.1 mm) flange, a 1.18 in (30.0 mm) web and a 1.9 in (48.3 mm) flange, and weighs 210 lb/ft (312.5 kg/m). Area 61.8 in² (39,871 mm²); strong-axis Ix = 2,140 in⁴ (89,073.5 cm⁴), Sx = 292 in³ (4,785 cm³), Zx = 348 in³ (5,702.7 cm³).

dDepth
373.4 mm14.7 in14.7 in373.4 mm
bfFlange width
325.1 mm12.8 in12.8 in325.1 mm
twWeb thickness
30.0 mm1.18 in1.18 in30.0 mm
tfFlange thickness
48.3 mm1.9 in1.9 in48.3 mm

Drawing

325.1 mm12.8 in373.4 mm14.7 intf 48.3 mmtf 1.9 intw 30.0 mmtw 1.18 ink 63.5 mmk 2.5 in
Drawn to scale · Dimensions in mmDimensions in inches

W12×210 specifications

dDepth14.7 in373.4 mm
bfFlange width12.8 in325.1 mm
twWeb thickness1.18 in30.0 mm
tfFlange thickness1.9 in48.3 mm
kDesign value2.5 in63.5 mm
kDetailing value2 13/16 in71.4 mm
k1Detailing value1 7/16 in36.5 mm
WWeight210 lb/ft312.5 kg/m
AArea61.8 in²39,871 mm²
IxMoment of inertia, strong axis2,140 in⁴89,073.5 cm⁴
ZxPlastic modulus, strong axis348 in³5,702.7 cm³
SxSection modulus, strong axis292 in³4,785 cm³
rxRadius of gyration, strong axis5.89 in149.6 mm
IyMoment of inertia, weak axis664 in⁴27,637.8 cm⁴
ZyPlastic modulus, weak axis159 in³2,605.5 cm³
SySection modulus, weak axis104 in³1,704.3 cm³
ryRadius of gyration, weak axis3.28 in83.3 mm
JTorsional constant64.7 in⁴2,693.02 cm⁴
bf/2tfFlange slenderness3.37
h/twWeb slenderness8.2
Metric designationW310×313

Also known as

W310×313

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.