W30×211 Beam Dimensions & Properties

W Shapes (AISC) · W30: 30 in nominal depth

W30×211 is an AISC wide-flange shape (W30: 30 in nominal depth). It is 30.9 in (784.9 mm) deep with a 15.1 in (383.5 mm) flange, a 0.775 in (19.7 mm) web and a 1.32 in (33.5 mm) flange, and weighs 211 lb/ft (314.0 kg/m). Area 62.3 in² (40,193 mm²); strong-axis Ix = 10,300 in⁴ (428,718.4 cm⁴), Sx = 665 in³ (10,897.4 cm³), Zx = 751 in³ (12,306.7 cm³).

dDepth
784.9 mm30.9 in30.9 in784.9 mm
bfFlange width
383.5 mm15.1 in15.1 in383.5 mm
twWeb thickness
19.7 mm0.775 in0.775 in19.7 mm
tfFlange thickness
33.5 mm1.32 in1.32 in33.5 mm

Drawing

383.5 mm15.1 in784.9 mm30.9 intf 33.5 mmtf 1.32 intw 19.7 mmtw 0.775 ink 53.3 mmk 2.1 in
Drawn to scale · Dimensions in mmDimensions in inches

W30×211 specifications

dDepth30.9 in784.9 mm
bfFlange width15.1 in383.5 mm
twWeb thickness0.775 in19.7 mm
tfFlange thickness1.32 in33.5 mm
kDesign value2.1 in53.3 mm
kDetailing value2 9/16 in65.1 mm
k1Detailing value1 5/8 in41.3 mm
WWeight211 lb/ft314.0 kg/m
AArea62.3 in²40,193 mm²
IxMoment of inertia, strong axis10,300 in⁴428,718.4 cm⁴
ZxPlastic modulus, strong axis751 in³12,306.7 cm³
SxSection modulus, strong axis665 in³10,897.4 cm³
rxRadius of gyration, strong axis12.9 in327.7 mm
IyMoment of inertia, weak axis757 in⁴31,508.7 cm⁴
ZyPlastic modulus, weak axis155 in³2,540 cm³
SySection modulus, weak axis100 in³1,638.7 cm³
ryRadius of gyration, weak axis3.49 in88.6 mm
JTorsional constant28.4 in⁴1,182.1 cm⁴
bf/2tfFlange slenderness5.74
h/twWeb slenderness34.5
Metric designationW760×314

Also known as

W760×314

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.