W14×211 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×211 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 15.7 in (398.8 mm) deep with a 15.8 in (401.3 mm) flange, a 0.98 in (24.9 mm) web and a 1.56 in (39.6 mm) flange, and weighs 211 lb/ft (314.0 kg/m). Area 62 in² (40,000 mm²); strong-axis Ix = 2,660 in⁴ (110,717.6 cm⁴), Sx = 338 in³ (5,538.8 cm³), Zx = 390 in³ (6,391 cm³).

dDepth
398.8 mm15.7 in15.7 in398.8 mm
bfFlange width
401.3 mm15.8 in15.8 in401.3 mm
twWeb thickness
24.9 mm0.98 in0.98 in24.9 mm
tfFlange thickness
39.6 mm1.56 in1.56 in39.6 mm

Drawing

401.3 mm15.8 in398.8 mm15.7 intf 39.6 mmtf 1.56 intw 24.9 mmtw 0.98 ink 54.9 mmk 2.16 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×211 specifications

dDepth15.7 in398.8 mm
bfFlange width15.8 in401.3 mm
twWeb thickness0.98 in24.9 mm
tfFlange thickness1.56 in39.6 mm
kDesign value2.16 in54.9 mm
kDetailing value2 7/8 in73.0 mm
k1Detailing value1 11/16 in42.9 mm
WWeight211 lb/ft314.0 kg/m
AArea62 in²40,000 mm²
IxMoment of inertia, strong axis2,660 in⁴110,717.6 cm⁴
ZxPlastic modulus, strong axis390 in³6,391 cm³
SxSection modulus, strong axis338 in³5,538.8 cm³
rxRadius of gyration, strong axis6.55 in166.4 mm
IyMoment of inertia, weak axis1,030 in⁴42,871.8 cm⁴
ZyPlastic modulus, weak axis198 in³3,244.6 cm³
SySection modulus, weak axis130 in³2,130.3 cm³
ryRadius of gyration, weak axis4.07 in103.4 mm
JTorsional constant44.6 in⁴1,856.39 cm⁴
bf/2tfFlange slenderness5.06
h/twWeb slenderness11.6
Metric designationW360×314

Also known as

W360×314

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.