W18×211 Beam Dimensions & Properties

W Shapes (AISC) · W18: 18 in nominal depth

W18×211 is an AISC wide-flange shape (W18: 18 in nominal depth). It is 20.7 in (525.8 mm) deep with a 11.6 in (294.6 mm) flange, a 1.06 in (26.9 mm) web and a 1.91 in (48.5 mm) flange, and weighs 211 lb/ft (314.0 kg/m). Area 62.3 in² (40,193 mm²); strong-axis Ix = 4,330 in⁴ (180,228.2 cm⁴), Sx = 419 in³ (6,866.2 cm³), Zx = 490 in³ (8,029.7 cm³).

dDepth
525.8 mm20.7 in20.7 in525.8 mm
bfFlange width
294.6 mm11.6 in11.6 in294.6 mm
twWeb thickness
26.9 mm1.06 in1.06 in26.9 mm
tfFlange thickness
48.5 mm1.91 in1.91 in48.5 mm

Drawing

294.6 mm11.6 in525.8 mm20.7 intf 48.5 mmtf 1.91 intw 26.9 mmtw 1.06 ink 58.7 mmk 2.31 in
Drawn to scale · Dimensions in mmDimensions in inches

W18×211 specifications

dDepth20.7 in525.8 mm
bfFlange width11.6 in294.6 mm
twWeb thickness1.06 in26.9 mm
tfFlange thickness1.91 in48.5 mm
kDesign value2.31 in58.7 mm
kDetailing value2 13/16 in71.4 mm
k1Detailing value1 3/8 in34.9 mm
WWeight211 lb/ft314.0 kg/m
AArea62.3 in²40,193 mm²
IxMoment of inertia, strong axis4,330 in⁴180,228.2 cm⁴
ZxPlastic modulus, strong axis490 in³8,029.7 cm³
SxSection modulus, strong axis419 in³6,866.2 cm³
rxRadius of gyration, strong axis8.35 in212.1 mm
IyMoment of inertia, weak axis493 in⁴20,520.2 cm⁴
ZyPlastic modulus, weak axis132 in³2,163.1 cm³
SySection modulus, weak axis85.3 in³1,397.8 cm³
ryRadius of gyration, weak axis2.82 in71.6 mm
JTorsional constant58.6 in⁴2,439.12 cm⁴
bf/2tfFlange slenderness3.02
h/twWeb slenderness15.1
Metric designationW460×315

Also known as

W460×315

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.