W36×210 Beam Dimensions & Properties
W Shapes (AISC) · W36: 36 in nominal depth
W36×210 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 36.7 in (932.2 mm) deep with a 12.2 in (309.9 mm) flange, a 0.83 in (21.1 mm) web and a 1.36 in (34.5 mm) flange, and weighs 210 lb/ft (312.5 kg/m). Area 61.9 in² (39,935 mm²); strong-axis Ix = 13,200 in⁴ (549,425.5 cm⁴), Sx = 719 in³ (11,782.3 cm³), Zx = 833 in³ (13,650.4 cm³).
- dDepth
- 932.2 mm36.7 in36.7 in932.2 mm
- bfFlange width
- 309.9 mm12.2 in12.2 in309.9 mm
- twWeb thickness
- 21.1 mm0.83 in0.83 in21.1 mm
- tfFlange thickness
- 34.5 mm1.36 in1.36 in34.5 mm
Drawing
W36×210 specifications
| dDepth | 36.7 in932.2 mm |
|---|---|
| bfFlange width | 12.2 in309.9 mm |
| twWeb thickness | 0.83 in21.1 mm |
| tfFlange thickness | 1.36 in34.5 mm |
| kDesign value | 2.11 in53.6 mm |
| kDetailing value | 2 5/8 in66.7 mm |
| k1Detailing value | 1 5/8 in41.3 mm |
| WWeight | 210 lb/ft312.5 kg/m |
| AArea | 61.9 in²39,935 mm² |
| IxMoment of inertia, strong axis | 13,200 in⁴549,425.5 cm⁴ |
| ZxPlastic modulus, strong axis | 833 in³13,650.4 cm³ |
| SxSection modulus, strong axis | 719 in³11,782.3 cm³ |
| rxRadius of gyration, strong axis | 14.6 in370.8 mm |
| IyMoment of inertia, weak axis | 411 in⁴17,107.1 cm⁴ |
| ZyPlastic modulus, weak axis | 107 in³1,753.4 cm³ |
| SySection modulus, weak axis | 67.5 in³1,106.1 cm³ |
| ryRadius of gyration, weak axis | 2.58 in65.5 mm |
| JTorsional constant | 28 in⁴1,165.45 cm⁴ |
| bf/2tfFlange slenderness | 4.48 |
| h/twWeb slenderness | 39.1 |
| Metric designation | W920×313 |
Also known as
W920×313
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.