W40×372 Beam Dimensions & Properties
W Shapes (AISC) · W40: 40 in nominal depth
W40×372 is an AISC wide-flange shape (W40: 40 in nominal depth). It is 40.6 in (1031.2 mm) deep with a 16.1 in (408.9 mm) flange, a 1.16 in (29.5 mm) web and a 2.05 in (52.1 mm) flange, and weighs 372 lb/ft (553.6 kg/m). Area 110 in² (70,968 mm²); strong-axis Ix = 29,600 in⁴ (1,232,045 cm⁴), Sx = 1,460 in³ (23,925.1 cm³), Zx = 1,680 in³ (27,530.3 cm³).
- dDepth
- 1031.2 mm40.6 in40.6 in1031.2 mm
- bfFlange width
- 408.9 mm16.1 in16.1 in408.9 mm
- twWeb thickness
- 29.5 mm1.16 in1.16 in29.5 mm
- tfFlange thickness
- 52.1 mm2.05 in2.05 in52.1 mm
Drawing
W40×372 specifications
| dDepth | 40.6 in1031.2 mm |
|---|---|
| bfFlange width | 16.1 in408.9 mm |
| twWeb thickness | 1.16 in29.5 mm |
| tfFlange thickness | 2.05 in52.1 mm |
| kDesign value | 3.23 in82.0 mm |
| kDetailing value | 3 5/16 in84.1 mm |
| k1Detailing value | 1 13/16 in46.0 mm |
| WWeight | 372 lb/ft553.6 kg/m |
| AArea | 110 in²70,968 mm² |
| IxMoment of inertia, strong axis | 29,600 in⁴1,232,045 cm⁴ |
| ZxPlastic modulus, strong axis | 1,680 in³27,530.3 cm³ |
| SxSection modulus, strong axis | 1,460 in³23,925.1 cm³ |
| rxRadius of gyration, strong axis | 16.5 in419.1 mm |
| IyMoment of inertia, weak axis | 1,420 in⁴59,104.9 cm⁴ |
| ZyPlastic modulus, weak axis | 277 in³4,539.2 cm³ |
| SySection modulus, weak axis | 177 in³2,900.5 cm³ |
| ryRadius of gyration, weak axis | 3.6 in91.4 mm |
| JTorsional constant | 116 in⁴4,828.28 cm⁴ |
| bf/2tfFlange slenderness | 3.93 |
| h/twWeb slenderness | 29.5 |
| Metric designation | W1000×554 |
Also known as
W1000×554
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.