W10×68 Beam Dimensions & Properties

W Shapes (AISC) · W10: 10 in nominal depth

W10×68 is an AISC wide-flange shape (W10: 10 in nominal depth). It is 10.4 in (264.2 mm) deep with a 10.1 in (256.5 mm) flange, a 0.47 in (11.9 mm) web and a 0.77 in (19.6 mm) flange, and weighs 68 lb/ft (101.2 kg/m). Area 19.9 in² (12,839 mm²); strong-axis Ix = 394 in⁴ (16,399.5 cm⁴), Sx = 75.7 in³ (1,240.5 cm³), Zx = 85.3 in³ (1,397.8 cm³).

dDepth
264.2 mm10.4 in10.4 in264.2 mm
bfFlange width
256.5 mm10.1 in10.1 in256.5 mm
twWeb thickness
11.9 mm0.47 in0.47 in11.9 mm
tfFlange thickness
19.6 mm0.77 in0.77 in19.6 mm

Drawing

256.5 mm10.1 in264.2 mm10.4 intf 19.6 mmtf 0.77 intw 11.9 mmtw 0.47 ink 32.3 mmk 1.27 in
Drawn to scale · Dimensions in mmDimensions in inches

W10×68 specifications

dDepth10.4 in264.2 mm
bfFlange width10.1 in256.5 mm
twWeb thickness0.47 in11.9 mm
tfFlange thickness0.77 in19.6 mm
kDesign value1.27 in32.3 mm
kDetailing value1 7/16 in36.5 mm
k1Detailing value7/8 in22.2 mm
WWeight68 lb/ft101.2 kg/m
AArea19.9 in²12,839 mm²
IxMoment of inertia, strong axis394 in⁴16,399.5 cm⁴
ZxPlastic modulus, strong axis85.3 in³1,397.8 cm³
SxSection modulus, strong axis75.7 in³1,240.5 cm³
rxRadius of gyration, strong axis4.44 in112.8 mm
IyMoment of inertia, weak axis134 in⁴5,577.5 cm⁴
ZyPlastic modulus, weak axis40.1 in³657.1 cm³
SySection modulus, weak axis26.4 in³432.6 cm³
ryRadius of gyration, weak axis2.59 in65.8 mm
JTorsional constant3.56 in⁴148.18 cm⁴
bf/2tfFlange slenderness6.58
h/twWeb slenderness16.7
Metric designationW250×101

Also known as

W250×101

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.