W10×77 Beam Dimensions & Properties

W Shapes (AISC) · W10: 10 in nominal depth

W10×77 is an AISC wide-flange shape (W10: 10 in nominal depth). It is 10.6 in (269.2 mm) deep with a 10.2 in (259.1 mm) flange, a 0.53 in (13.5 mm) web and a 0.87 in (22.1 mm) flange, and weighs 77 lb/ft (114.6 kg/m). Area 22.7 in² (14,645 mm²); strong-axis Ix = 455 in⁴ (18,938.5 cm⁴), Sx = 85.9 in³ (1,407.6 cm³), Zx = 97.6 in³ (1,599.4 cm³).

dDepth
269.2 mm10.6 in10.6 in269.2 mm
bfFlange width
259.1 mm10.2 in10.2 in259.1 mm
twWeb thickness
13.5 mm0.53 in0.53 in13.5 mm
tfFlange thickness
22.1 mm0.87 in0.87 in22.1 mm

Drawing

259.1 mm10.2 in269.2 mm10.6 intf 22.1 mmtf 0.87 intw 13.5 mmtw 0.53 ink 34.8 mmk 1.37 in
Drawn to scale · Dimensions in mmDimensions in inches

W10×77 specifications

dDepth10.6 in269.2 mm
bfFlange width10.2 in259.1 mm
twWeb thickness0.53 in13.5 mm
tfFlange thickness0.87 in22.1 mm
kDesign value1.37 in34.8 mm
kDetailing value1 9/16 in39.7 mm
k1Detailing value7/8 in22.2 mm
WWeight77 lb/ft114.6 kg/m
AArea22.7 in²14,645 mm²
IxMoment of inertia, strong axis455 in⁴18,938.5 cm⁴
ZxPlastic modulus, strong axis97.6 in³1,599.4 cm³
SxSection modulus, strong axis85.9 in³1,407.6 cm³
rxRadius of gyration, strong axis4.49 in114.0 mm
IyMoment of inertia, weak axis154 in⁴6,410 cm⁴
ZyPlastic modulus, weak axis45.9 in³752.2 cm³
SySection modulus, weak axis30.1 in³493.3 cm³
ryRadius of gyration, weak axis2.6 in66.0 mm
JTorsional constant5.11 in⁴212.69 cm⁴
bf/2tfFlange slenderness5.86
h/twWeb slenderness14.8
Metric designationW250×115

Also known as

W250×115

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.