W16×77 Beam Dimensions & Properties

W Shapes (AISC) · W16: 16 in nominal depth

W16×77 is an AISC wide-flange shape (W16: 16 in nominal depth). It is 16.5 in (419.1 mm) deep with a 10.3 in (261.6 mm) flange, a 0.455 in (11.6 mm) web and a 0.76 in (19.3 mm) flange, and weighs 77 lb/ft (114.6 kg/m). Area 22.6 in² (14,581 mm²); strong-axis Ix = 1,110 in⁴ (46,201.7 cm⁴), Sx = 134 in³ (2,195.9 cm³), Zx = 150 in³ (2,458.1 cm³).

dDepth
419.1 mm16.5 in16.5 in419.1 mm
bfFlange width
261.6 mm10.3 in10.3 in261.6 mm
twWeb thickness
11.6 mm0.455 in0.455 in11.6 mm
tfFlange thickness
19.3 mm0.76 in0.76 in19.3 mm

Drawing

261.6 mm10.3 in419.1 mm16.5 intf 19.3 mmtf 0.76 intw 11.6 mmtw 0.455 ink 29.5 mmk 1.16 in
Drawn to scale · Dimensions in mmDimensions in inches

W16×77 specifications

dDepth16.5 in419.1 mm
bfFlange width10.3 in261.6 mm
twWeb thickness0.455 in11.6 mm
tfFlange thickness0.76 in19.3 mm
kDesign value1.16 in29.5 mm
kDetailing value1 5/8 in41.3 mm
k1Detailing value1 1/16 in27.0 mm
WWeight77 lb/ft114.6 kg/m
AArea22.6 in²14,581 mm²
IxMoment of inertia, strong axis1,110 in⁴46,201.7 cm⁴
ZxPlastic modulus, strong axis150 in³2,458.1 cm³
SxSection modulus, strong axis134 in³2,195.9 cm³
rxRadius of gyration, strong axis7 in177.8 mm
IyMoment of inertia, weak axis138 in⁴5,744 cm⁴
ZyPlastic modulus, weak axis41.1 in³673.5 cm³
SySection modulus, weak axis26.9 in³440.8 cm³
ryRadius of gyration, weak axis2.47 in62.7 mm
JTorsional constant3.57 in⁴148.59 cm⁴
bf/2tfFlange slenderness6.77
h/twWeb slenderness31.2
Metric designationW410×114

Also known as

W410×114

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.