W12×336 Beam Dimensions & Properties
W Shapes (AISC) · W12: 12 in nominal depth
W12×336 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 16.8 in (426.7 mm) deep with a 13.4 in (340.4 mm) flange, a 1.78 in (45.2 mm) web and a 2.96 in (75.2 mm) flange, and weighs 336 lb/ft (500.0 kg/m). Area 98.9 in² (63,806 mm²); strong-axis Ix = 4,060 in⁴ (168,990 cm⁴), Sx = 483 in³ (7,915 cm³), Zx = 603 in³ (9,881.4 cm³).
- dDepth
- 426.7 mm16.8 in16.8 in426.7 mm
- bfFlange width
- 340.4 mm13.4 in13.4 in340.4 mm
- twWeb thickness
- 45.2 mm1.78 in1.78 in45.2 mm
- tfFlange thickness
- 75.2 mm2.96 in2.96 in75.2 mm
Drawing
W12×336 specifications
| dDepth | 16.8 in426.7 mm |
|---|---|
| bfFlange width | 13.4 in340.4 mm |
| twWeb thickness | 1.78 in45.2 mm |
| tfFlange thickness | 2.96 in75.2 mm |
| kDesign value | 3.55 in90.2 mm |
| kDetailing value | 3 7/8 in98.4 mm |
| k1Detailing value | 1 11/16 in42.9 mm |
| WWeight | 336 lb/ft500.0 kg/m |
| AArea | 98.9 in²63,806 mm² |
| IxMoment of inertia, strong axis | 4,060 in⁴168,990 cm⁴ |
| ZxPlastic modulus, strong axis | 603 in³9,881.4 cm³ |
| SxSection modulus, strong axis | 483 in³7,915 cm³ |
| rxRadius of gyration, strong axis | 6.41 in162.8 mm |
| IyMoment of inertia, weak axis | 1,190 in⁴49,531.5 cm⁴ |
| ZyPlastic modulus, weak axis | 274 in³4,490.1 cm³ |
| SySection modulus, weak axis | 177 in³2,900.5 cm³ |
| ryRadius of gyration, weak axis | 3.47 in88.1 mm |
| JTorsional constant | 243 in⁴10,114.42 cm⁴ |
| bf/2tfFlange slenderness | 2.26 |
| h/twWeb slenderness | 5.5 |
| Metric designation | W310×500 |
Also known as
W310×500
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.