W12×305 Beam Dimensions & Properties
W Shapes (AISC) · W12: 12 in nominal depth
W12×305 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 16.3 in (414.0 mm) deep with a 13.2 in (335.3 mm) flange, a 1.63 in (41.4 mm) web and a 2.71 in (68.8 mm) flange, and weighs 305 lb/ft (453.9 kg/m). Area 89.5 in² (57,742 mm²); strong-axis Ix = 3,550 in⁴ (147,762.2 cm⁴), Sx = 435 in³ (7,128.4 cm³), Zx = 537 in³ (8,799.9 cm³).
- dDepth
- 414.0 mm16.3 in16.3 in414.0 mm
- bfFlange width
- 335.3 mm13.2 in13.2 in335.3 mm
- twWeb thickness
- 41.4 mm1.63 in1.63 in41.4 mm
- tfFlange thickness
- 68.8 mm2.71 in2.71 in68.8 mm
Drawing
W12×305 specifications
| dDepth | 16.3 in414.0 mm |
|---|---|
| bfFlange width | 13.2 in335.3 mm |
| twWeb thickness | 1.63 in41.4 mm |
| tfFlange thickness | 2.71 in68.8 mm |
| kDesign value | 3.3 in83.8 mm |
| kDetailing value | 3 5/8 in92.1 mm |
| k1Detailing value | 1 5/8 in41.3 mm |
| WWeight | 305 lb/ft453.9 kg/m |
| AArea | 89.5 in²57,742 mm² |
| IxMoment of inertia, strong axis | 3,550 in⁴147,762.2 cm⁴ |
| ZxPlastic modulus, strong axis | 537 in³8,799.9 cm³ |
| SxSection modulus, strong axis | 435 in³7,128.4 cm³ |
| rxRadius of gyration, strong axis | 6.29 in159.8 mm |
| IyMoment of inertia, weak axis | 1,050 in⁴43,704.3 cm⁴ |
| ZyPlastic modulus, weak axis | 244 in³3,998.4 cm³ |
| SySection modulus, weak axis | 159 in³2,605.5 cm³ |
| ryRadius of gyration, weak axis | 3.42 in86.9 mm |
| JTorsional constant | 185 in⁴7,700.28 cm⁴ |
| bf/2tfFlange slenderness | 2.45 |
| h/twWeb slenderness | 6 |
| Metric designation | W310×454 |
Also known as
W310×454
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.