W24×335 Beam Dimensions & Properties
W Shapes (AISC) · W24: 24 in nominal depth
W24×335 is an AISC wide-flange shape (W24: 24 in nominal depth). It is 27.5 in (698.5 mm) deep with a 13.5 in (342.9 mm) flange, a 1.38 in (35.1 mm) web and a 2.48 in (63.0 mm) flange, and weighs 335 lb/ft (498.5 kg/m). Area 98.3 in² (63,419 mm²); strong-axis Ix = 11,900 in⁴ (495,315.4 cm⁴), Sx = 864 in³ (14,158.4 cm³), Zx = 1,020 in³ (16,714.8 cm³).
- dDepth
- 698.5 mm27.5 in27.5 in698.5 mm
- bfFlange width
- 342.9 mm13.5 in13.5 in342.9 mm
- twWeb thickness
- 35.1 mm1.38 in1.38 in35.1 mm
- tfFlange thickness
- 63.0 mm2.48 in2.48 in63.0 mm
Drawing
W24×335 specifications
| dDepth | 27.5 in698.5 mm |
|---|---|
| bfFlange width | 13.5 in342.9 mm |
| twWeb thickness | 1.38 in35.1 mm |
| tfFlange thickness | 2.48 in63.0 mm |
| kDesign value | 2.98 in75.7 mm |
| kDetailing value | 3 3/4 in95.3 mm |
| k1Detailing value | 1 7/8 in47.6 mm |
| WWeight | 335 lb/ft498.5 kg/m |
| AArea | 98.3 in²63,419 mm² |
| IxMoment of inertia, strong axis | 11,900 in⁴495,315.4 cm⁴ |
| ZxPlastic modulus, strong axis | 1,020 in³16,714.8 cm³ |
| SxSection modulus, strong axis | 864 in³14,158.4 cm³ |
| rxRadius of gyration, strong axis | 11 in279.4 mm |
| IyMoment of inertia, weak axis | 1,030 in⁴42,871.8 cm⁴ |
| ZyPlastic modulus, weak axis | 238 in³3,900.1 cm³ |
| SySection modulus, weak axis | 152 in³2,490.8 cm³ |
| ryRadius of gyration, weak axis | 3.23 in82.0 mm |
| JTorsional constant | 152 in⁴6,326.72 cm⁴ |
| bf/2tfFlange slenderness | 2.73 |
| h/twWeb slenderness | 15.6 |
| Metric designation | W610×498 |
Also known as
W610×498
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.