W14×342 Beam Dimensions & Properties
W Shapes (AISC) · W14: 14 in nominal depth
W14×342 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 17.5 in (444.5 mm) deep with a 16.4 in (416.6 mm) flange, a 1.54 in (39.1 mm) web and a 2.47 in (62.7 mm) flange, and weighs 342 lb/ft (509.0 kg/m). Area 101 in² (65,161 mm²); strong-axis Ix = 4,900 in⁴ (203,953.4 cm⁴), Sx = 558 in³ (9,144 cm³), Zx = 672 in³ (11,012.1 cm³).
- dDepth
- 444.5 mm17.5 in17.5 in444.5 mm
- bfFlange width
- 416.6 mm16.4 in16.4 in416.6 mm
- twWeb thickness
- 39.1 mm1.54 in1.54 in39.1 mm
- tfFlange thickness
- 62.7 mm2.47 in2.47 in62.7 mm
Drawing
W14×342 specifications
| dDepth | 17.5 in444.5 mm |
|---|---|
| bfFlange width | 16.4 in416.6 mm |
| twWeb thickness | 1.54 in39.1 mm |
| tfFlange thickness | 2.47 in62.7 mm |
| kDesign value | 3.07 in78.0 mm |
| kDetailing value | 3 3/4 in95.3 mm |
| k1Detailing value | 2 in50.8 mm |
| WWeight | 342 lb/ft509.0 kg/m |
| AArea | 101 in²65,161 mm² |
| IxMoment of inertia, strong axis | 4,900 in⁴203,953.4 cm⁴ |
| ZxPlastic modulus, strong axis | 672 in³11,012.1 cm³ |
| SxSection modulus, strong axis | 558 in³9,144 cm³ |
| rxRadius of gyration, strong axis | 6.98 in177.3 mm |
| IyMoment of inertia, weak axis | 1,810 in⁴75,337.9 cm⁴ |
| ZyPlastic modulus, weak axis | 338 in³5,538.8 cm³ |
| SySection modulus, weak axis | 221 in³3,621.5 cm³ |
| ryRadius of gyration, weak axis | 4.24 in107.7 mm |
| JTorsional constant | 178 in⁴7,408.92 cm⁴ |
| bf/2tfFlange slenderness | 3.31 |
| h/twWeb slenderness | 7.4 |
| Metric designation | W360×509 |
Also known as
W360×509
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.