W30×326 Beam Dimensions & Properties

W Shapes (AISC) · W30: 30 in nominal depth

W30×326 is an AISC wide-flange shape (W30: 30 in nominal depth). It is 32.4 in (823.0 mm) deep with a 15.4 in (391.2 mm) flange, a 1.14 in (29.0 mm) web and a 2.05 in (52.1 mm) flange, and weighs 326 lb/ft (485.1 kg/m). Area 95.9 in² (61,871 mm²); strong-axis Ix = 16,800 in⁴ (699,268.8 cm⁴), Sx = 1,040 in³ (17,042.5 cm³), Zx = 1,190 in³ (19,500.6 cm³).

dDepth
823.0 mm32.4 in32.4 in823.0 mm
bfFlange width
391.2 mm15.4 in15.4 in391.2 mm
twWeb thickness
29.0 mm1.14 in1.14 in29.0 mm
tfFlange thickness
52.1 mm2.05 in2.05 in52.1 mm

Drawing

391.2 mm15.4 in823.0 mm32.4 intf 52.1 mmtf 2.05 intw 29.0 mmtw 1.14 ink 72.1 mmk 2.84 in
Drawn to scale · Dimensions in mmDimensions in inches

W30×326 specifications

dDepth32.4 in823.0 mm
bfFlange width15.4 in391.2 mm
twWeb thickness1.14 in29.0 mm
tfFlange thickness2.05 in52.1 mm
kDesign value2.84 in72.1 mm
kDetailing value3 5/16 in84.1 mm
k1Detailing value1 3/4 in44.4 mm
WWeight326 lb/ft485.1 kg/m
AArea95.9 in²61,871 mm²
IxMoment of inertia, strong axis16,800 in⁴699,268.8 cm⁴
ZxPlastic modulus, strong axis1,190 in³19,500.6 cm³
SxSection modulus, strong axis1,040 in³17,042.5 cm³
rxRadius of gyration, strong axis13.2 in335.3 mm
IyMoment of inertia, weak axis1,240 in⁴51,612.7 cm⁴
ZyPlastic modulus, weak axis252 in³4,129.5 cm³
SySection modulus, weak axis162 in³2,654.7 cm³
ryRadius of gyration, weak axis3.6 in91.4 mm
JTorsional constant103 in⁴4,287.18 cm⁴
bf/2tfFlange slenderness3.75
h/twWeb slenderness23.4
Metric designationW760×484

Also known as

W760×484

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.