W40×327 Beam Dimensions & Properties
W Shapes (AISC) · W40: 40 in nominal depth
W40×327 is an AISC wide-flange shape (W40: 40 in nominal depth). It is 40.8 in (1036.3 mm) deep with a 12.1 in (307.3 mm) flange, a 1.18 in (30.0 mm) web and a 2.13 in (54.1 mm) flange, and weighs 327 lb/ft (486.6 kg/m). Area 95.9 in² (61,871 mm²); strong-axis Ix = 24,500 in⁴ (1,019,767 cm⁴), Sx = 1,200 in³ (19,664.5 cm³), Zx = 1,410 in³ (23,105.8 cm³).
- dDepth
- 1036.3 mm40.8 in40.8 in1036.3 mm
- bfFlange width
- 307.3 mm12.1 in12.1 in307.3 mm
- twWeb thickness
- 30.0 mm1.18 in1.18 in30.0 mm
- tfFlange thickness
- 54.1 mm2.13 in2.13 in54.1 mm
Drawing
W40×327 specifications
| dDepth | 40.8 in1036.3 mm |
|---|---|
| bfFlange width | 12.1 in307.3 mm |
| twWeb thickness | 1.18 in30.0 mm |
| tfFlange thickness | 2.13 in54.1 mm |
| kDesign value | 3.31 in84.1 mm |
| kDetailing value | 3 3/8 in85.7 mm |
| k1Detailing value | 1 13/16 in46.0 mm |
| WWeight | 327 lb/ft486.6 kg/m |
| AArea | 95.9 in²61,871 mm² |
| IxMoment of inertia, strong axis | 24,500 in⁴1,019,767 cm⁴ |
| ZxPlastic modulus, strong axis | 1,410 in³23,105.8 cm³ |
| SxSection modulus, strong axis | 1,200 in³19,664.5 cm³ |
| rxRadius of gyration, strong axis | 16 in406.4 mm |
| IyMoment of inertia, weak axis | 640 in⁴26,638.8 cm⁴ |
| ZyPlastic modulus, weak axis | 170 in³2,785.8 cm³ |
| SySection modulus, weak axis | 105 in³1,720.6 cm³ |
| ryRadius of gyration, weak axis | 2.58 in65.5 mm |
| JTorsional constant | 103 in⁴4,287.18 cm⁴ |
| bf/2tfFlange slenderness | 2.85 |
| h/twWeb slenderness | 29 |
| Metric designation | W1000×486 |
Also known as
W1000×486
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.