W36×330 Beam Dimensions & Properties

W Shapes (AISC) · W36: 36 in nominal depth

W36×330 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 37.7 in (957.6 mm) deep with a 16.6 in (421.6 mm) flange, a 1.02 in (25.9 mm) web and a 1.85 in (47.0 mm) flange, and weighs 330 lb/ft (491.1 kg/m). Area 96.9 in² (62,516 mm²); strong-axis Ix = 23,300 in⁴ (969,819.2 cm⁴), Sx = 1,240 in³ (20,320 cm³), Zx = 1,410 in³ (23,105.8 cm³).

dDepth
957.6 mm37.7 in37.7 in957.6 mm
bfFlange width
421.6 mm16.6 in16.6 in421.6 mm
twWeb thickness
25.9 mm1.02 in1.02 in25.9 mm
tfFlange thickness
47.0 mm1.85 in1.85 in47.0 mm

Drawing

421.6 mm16.6 in957.6 mm37.7 intf 47.0 mmtf 1.85 intw 25.9 mmtw 1.02 ink 71.1 mmk 2.8 in
Drawn to scale · Dimensions in mmDimensions in inches

W36×330 specifications

dDepth37.7 in957.6 mm
bfFlange width16.6 in421.6 mm
twWeb thickness1.02 in25.9 mm
tfFlange thickness1.85 in47.0 mm
kDesign value2.8 in71.1 mm
kDetailing value3 1/8 in79.4 mm
k1Detailing value1 3/4 in44.4 mm
WWeight330 lb/ft491.1 kg/m
AArea96.9 in²62,516 mm²
IxMoment of inertia, strong axis23,300 in⁴969,819.2 cm⁴
ZxPlastic modulus, strong axis1,410 in³23,105.8 cm³
SxSection modulus, strong axis1,240 in³20,320 cm³
rxRadius of gyration, strong axis15.5 in393.7 mm
IyMoment of inertia, weak axis1,420 in⁴59,104.9 cm⁴
ZyPlastic modulus, weak axis265 in³4,342.6 cm³
SySection modulus, weak axis171 in³2,802.2 cm³
ryRadius of gyration, weak axis3.83 in97.3 mm
JTorsional constant84.3 in⁴3,508.83 cm⁴
bf/2tfFlange slenderness4.49
h/twWeb slenderness31.4
Metric designationW920×491

Also known as

W920×491

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.