W40×324 Beam Dimensions & Properties

W Shapes (AISC) · W40: 40 in nominal depth

W40×324 is an AISC wide-flange shape (W40: 40 in nominal depth). It is 40.2 in (1021.1 mm) deep with a 15.9 in (403.9 mm) flange, a 1 in (25.4 mm) web and a 1.81 in (46.0 mm) flange, and weighs 324 lb/ft (482.2 kg/m). Area 95.3 in² (61,484 mm²); strong-axis Ix = 25,600 in⁴ (1,065,552.4 cm⁴), Sx = 1,280 in³ (20,975.4 cm³), Zx = 1,460 in³ (23,925.1 cm³).

dDepth
1021.1 mm40.2 in40.2 in1021.1 mm
bfFlange width
403.9 mm15.9 in15.9 in403.9 mm
twWeb thickness
25.4 mm1 in1 in25.4 mm
tfFlange thickness
46.0 mm1.81 in1.81 in46.0 mm

Drawing

403.9 mm15.9 in1021.1 mm40.2 intf 46.0 mmtf 1.81 intw 25.4 mmtw 1 ink 75.9 mmk 2.99 in
Drawn to scale · Dimensions in mmDimensions in inches

W40×324 specifications

dDepth40.2 in1021.1 mm
bfFlange width15.9 in403.9 mm
twWeb thickness1 in25.4 mm
tfFlange thickness1.81 in46.0 mm
kDesign value2.99 in75.9 mm
kDetailing value3 1/16 in77.8 mm
k1Detailing value1 11/16 in42.9 mm
WWeight324 lb/ft482.2 kg/m
AArea95.3 in²61,484 mm²
IxMoment of inertia, strong axis25,600 in⁴1,065,552.4 cm⁴
ZxPlastic modulus, strong axis1,460 in³23,925.1 cm³
SxSection modulus, strong axis1,280 in³20,975.4 cm³
rxRadius of gyration, strong axis16.4 in416.6 mm
IyMoment of inertia, weak axis1,220 in⁴50,780.2 cm⁴
ZyPlastic modulus, weak axis239 in³3,916.5 cm³
SySection modulus, weak axis153 in³2,507.2 cm³
ryRadius of gyration, weak axis3.58 in90.9 mm
JTorsional constant79.4 in⁴3,304.88 cm⁴
bf/2tfFlange slenderness4.4
h/twWeb slenderness34.2
Metric designationW1000×483

Also known as

W1000×483

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.