W12×50 Beam Dimensions & Properties
W Shapes (AISC) · W12: 12 in nominal depth
W12×50 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 12.2 in (309.9 mm) deep with a 8.08 in (205.2 mm) flange, a 0.37 in (9.4 mm) web and a 0.64 in (16.3 mm) flange, and weighs 50 lb/ft (74.4 kg/m). Area 14.6 in² (9,419 mm²); strong-axis Ix = 391 in⁴ (16,274.6 cm⁴), Sx = 64.2 in³ (1,052 cm³), Zx = 71.9 in³ (1,178.2 cm³).
- dDepth
- 309.9 mm12.2 in12.2 in309.9 mm
- bfFlange width
- 205.2 mm8.08 in8.08 in205.2 mm
- twWeb thickness
- 9.4 mm0.37 in0.37 in9.4 mm
- tfFlange thickness
- 16.3 mm0.64 in0.64 in16.3 mm
Drawing
W12×50 specifications
| dDepth | 12.2 in309.9 mm |
|---|---|
| bfFlange width | 8.08 in205.2 mm |
| twWeb thickness | 0.37 in9.4 mm |
| tfFlange thickness | 0.64 in16.3 mm |
| kDesign value | 1.14 in29.0 mm |
| kDetailing value | 1 1/2 in38.1 mm |
| k1Detailing value | 15/16 in23.8 mm |
| WWeight | 50 lb/ft74.4 kg/m |
| AArea | 14.6 in²9,419 mm² |
| IxMoment of inertia, strong axis | 391 in⁴16,274.6 cm⁴ |
| ZxPlastic modulus, strong axis | 71.9 in³1,178.2 cm³ |
| SxSection modulus, strong axis | 64.2 in³1,052 cm³ |
| rxRadius of gyration, strong axis | 5.18 in131.6 mm |
| IyMoment of inertia, weak axis | 56.3 in⁴2,343.4 cm⁴ |
| ZyPlastic modulus, weak axis | 21.3 in³349 cm³ |
| SySection modulus, weak axis | 13.9 in³227.8 cm³ |
| ryRadius of gyration, weak axis | 1.96 in49.8 mm |
| JTorsional constant | 1.71 in⁴71.18 cm⁴ |
| bf/2tfFlange slenderness | 6.31 |
| h/twWeb slenderness | 26.8 |
| Metric designation | W310×74 |
Also known as
W310×74
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.