W12×53 Beam Dimensions & Properties

W Shapes (AISC) · W12: 12 in nominal depth

W12×53 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 12.1 in (307.3 mm) deep with a 10 in (254.0 mm) flange, a 0.345 in (8.8 mm) web and a 0.575 in (14.6 mm) flange, and weighs 53 lb/ft (78.9 kg/m). Area 15.6 in² (10,064 mm²); strong-axis Ix = 425 in⁴ (17,689.8 cm⁴), Sx = 70.6 in³ (1,156.9 cm³), Zx = 77.9 in³ (1,276.6 cm³).

dDepth
307.3 mm12.1 in12.1 in307.3 mm
bfFlange width
254.0 mm10 in10 in254.0 mm
twWeb thickness
8.8 mm0.345 in0.345 in8.8 mm
tfFlange thickness
14.6 mm0.575 in0.575 in14.6 mm

Drawing

254.0 mm10 in307.3 mm12.1 intf 14.6 mmtf 0.575 intw 8.8 mmtw 0.345 ink 30.0 mmk 1.18 in
Drawn to scale · Dimensions in mmDimensions in inches

W12×53 specifications

dDepth12.1 in307.3 mm
bfFlange width10 in254.0 mm
twWeb thickness0.345 in8.8 mm
tfFlange thickness0.575 in14.6 mm
kDesign value1.18 in30.0 mm
kDetailing value1 3/8 in34.9 mm
k1Detailing value15/16 in23.8 mm
WWeight53 lb/ft78.9 kg/m
AArea15.6 in²10,064 mm²
IxMoment of inertia, strong axis425 in⁴17,689.8 cm⁴
ZxPlastic modulus, strong axis77.9 in³1,276.6 cm³
SxSection modulus, strong axis70.6 in³1,156.9 cm³
rxRadius of gyration, strong axis5.23 in132.8 mm
IyMoment of inertia, weak axis95.8 in⁴3,987.5 cm⁴
ZyPlastic modulus, weak axis29.1 in³476.9 cm³
SySection modulus, weak axis19.2 in³314.6 cm³
ryRadius of gyration, weak axis2.48 in63.0 mm
JTorsional constant1.58 in⁴65.76 cm⁴
bf/2tfFlange slenderness8.69
h/twWeb slenderness28.1
Metric designationW310×79

Also known as

W310×79

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.