W21×55 Beam Dimensions & Properties

W Shapes (AISC) · W21: 21 in nominal depth

W21×55 is an AISC wide-flange shape (W21: 21 in nominal depth). It is 20.8 in (528.3 mm) deep with a 8.22 in (208.8 mm) flange, a 0.375 in (9.5 mm) web and a 0.522 in (13.3 mm) flange, and weighs 55 lb/ft (81.8 kg/m). Area 16.2 in² (10,452 mm²); strong-axis Ix = 1,140 in⁴ (47,450.4 cm⁴), Sx = 110 in³ (1,802.6 cm³), Zx = 126 in³ (2,064.8 cm³).

dDepth
528.3 mm20.8 in20.8 in528.3 mm
bfFlange width
208.8 mm8.22 in8.22 in208.8 mm
twWeb thickness
9.5 mm0.375 in0.375 in9.5 mm
tfFlange thickness
13.3 mm0.522 in0.522 in13.3 mm

Drawing

208.8 mm8.22 in528.3 mm20.8 intf 13.3 mmtf 0.522 intw 9.5 mmtw 0.375 ink 25.9 mmk 1.02 in
Drawn to scale · Dimensions in mmDimensions in inches

W21×55 specifications

dDepth20.8 in528.3 mm
bfFlange width8.22 in208.8 mm
twWeb thickness0.375 in9.5 mm
tfFlange thickness0.522 in13.3 mm
kDesign value1.02 in25.9 mm
kDetailing value1 3/16 in30.2 mm
k1Detailing value13/16 in20.6 mm
WWeight55 lb/ft81.8 kg/m
AArea16.2 in²10,452 mm²
IxMoment of inertia, strong axis1,140 in⁴47,450.4 cm⁴
ZxPlastic modulus, strong axis126 in³2,064.8 cm³
SxSection modulus, strong axis110 in³1,802.6 cm³
rxRadius of gyration, strong axis8.4 in213.4 mm
IyMoment of inertia, weak axis48.4 in⁴2,014.6 cm⁴
ZyPlastic modulus, weak axis18.4 in³301.5 cm³
SySection modulus, weak axis11.8 in³193.4 cm³
ryRadius of gyration, weak axis1.73 in43.9 mm
JTorsional constant1.24 in⁴51.61 cm⁴
bf/2tfFlange slenderness7.87
h/twWeb slenderness50
Metric designationW530×82

Also known as

W530×82

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.