W18×55 Beam Dimensions & Properties

W Shapes (AISC) · W18: 18 in nominal depth

W18×55 is an AISC wide-flange shape (W18: 18 in nominal depth). It is 18.1 in (459.7 mm) deep with a 7.53 in (191.3 mm) flange, a 0.39 in (9.9 mm) web and a 0.63 in (16.0 mm) flange, and weighs 55 lb/ft (81.8 kg/m). Area 16.2 in² (10,452 mm²); strong-axis Ix = 890 in⁴ (37,044.6 cm⁴), Sx = 98.3 in³ (1,610.8 cm³), Zx = 112 in³ (1,835.4 cm³).

dDepth
459.7 mm18.1 in18.1 in459.7 mm
bfFlange width
191.3 mm7.53 in7.53 in191.3 mm
twWeb thickness
9.9 mm0.39 in0.39 in9.9 mm
tfFlange thickness
16.0 mm0.63 in0.63 in16.0 mm

Drawing

191.3 mm7.53 in459.7 mm18.1 intf 16.0 mmtf 0.63 intw 9.9 mmtw 0.39 ink 26.2 mmk 1.03 in
Drawn to scale · Dimensions in mmDimensions in inches

W18×55 specifications

dDepth18.1 in459.7 mm
bfFlange width7.53 in191.3 mm
twWeb thickness0.39 in9.9 mm
tfFlange thickness0.63 in16.0 mm
kDesign value1.03 in26.2 mm
kDetailing value1 5/16 in33.3 mm
k1Detailing value13/16 in20.6 mm
WWeight55 lb/ft81.8 kg/m
AArea16.2 in²10,452 mm²
IxMoment of inertia, strong axis890 in⁴37,044.6 cm⁴
ZxPlastic modulus, strong axis112 in³1,835.4 cm³
SxSection modulus, strong axis98.3 in³1,610.8 cm³
rxRadius of gyration, strong axis7.41 in188.2 mm
IyMoment of inertia, weak axis44.9 in⁴1,868.9 cm⁴
ZyPlastic modulus, weak axis18.5 in³303.2 cm³
SySection modulus, weak axis11.9 in³195 cm³
ryRadius of gyration, weak axis1.67 in42.4 mm
JTorsional constant1.66 in⁴69.09 cm⁴
bf/2tfFlange slenderness5.98
h/twWeb slenderness41.1
Metric designationW460×82

Also known as

W460×82

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.