W16×57 Beam Dimensions & Properties

W Shapes (AISC) · W16: 16 in nominal depth

W16×57 is an AISC wide-flange shape (W16: 16 in nominal depth). It is 16.4 in (416.6 mm) deep with a 7.12 in (180.8 mm) flange, a 0.43 in (10.9 mm) web and a 0.715 in (18.2 mm) flange, and weighs 57 lb/ft (84.8 kg/m). Area 16.8 in² (10,839 mm²); strong-axis Ix = 758 in⁴ (31,550.3 cm⁴), Sx = 92.2 in³ (1,510.9 cm³), Zx = 105 in³ (1,720.6 cm³).

dDepth
416.6 mm16.4 in16.4 in416.6 mm
bfFlange width
180.8 mm7.12 in7.12 in180.8 mm
twWeb thickness
10.9 mm0.43 in0.43 in10.9 mm
tfFlange thickness
18.2 mm0.715 in0.715 in18.2 mm

Drawing

180.8 mm7.12 in416.6 mm16.4 intf 18.2 mmtf 0.715 intw 10.9 mmtw 0.43 ink 28.4 mmk 1.12 in
Drawn to scale · Dimensions in mmDimensions in inches

W16×57 specifications

dDepth16.4 in416.6 mm
bfFlange width7.12 in180.8 mm
twWeb thickness0.43 in10.9 mm
tfFlange thickness0.715 in18.2 mm
kDesign value1.12 in28.4 mm
kDetailing value1 3/8 in34.9 mm
k1Detailing value7/8 in22.2 mm
WWeight57 lb/ft84.8 kg/m
AArea16.8 in²10,839 mm²
IxMoment of inertia, strong axis758 in⁴31,550.3 cm⁴
ZxPlastic modulus, strong axis105 in³1,720.6 cm³
SxSection modulus, strong axis92.2 in³1,510.9 cm³
rxRadius of gyration, strong axis6.72 in170.7 mm
IyMoment of inertia, weak axis43.1 in⁴1,794 cm⁴
ZyPlastic modulus, weak axis18.9 in³309.7 cm³
SySection modulus, weak axis12.1 in³198.3 cm³
ryRadius of gyration, weak axis1.6 in40.6 mm
JTorsional constant2.22 in⁴92.4 cm⁴
bf/2tfFlange slenderness4.98
h/twWeb slenderness33
Metric designationW410×85

Also known as

W410×85

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.