W14×99 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×99 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 14.2 in (360.7 mm) deep with a 14.6 in (370.8 mm) flange, a 0.485 in (12.3 mm) web and a 0.78 in (19.8 mm) flange, and weighs 99 lb/ft (147.3 kg/m). Area 29.1 in² (18,774 mm²); strong-axis Ix = 1,110 in⁴ (46,201.7 cm⁴), Sx = 157 in³ (2,572.8 cm³), Zx = 173 in³ (2,835 cm³).

dDepth
360.7 mm14.2 in14.2 in360.7 mm
bfFlange width
370.8 mm14.6 in14.6 in370.8 mm
twWeb thickness
12.3 mm0.485 in0.485 in12.3 mm
tfFlange thickness
19.8 mm0.78 in0.78 in19.8 mm

Drawing

370.8 mm14.6 in360.7 mm14.2 intf 19.8 mmtf 0.78 intw 12.3 mmtw 0.485 ink 35.1 mmk 1.38 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×99 specifications

dDepth14.2 in360.7 mm
bfFlange width14.6 in370.8 mm
twWeb thickness0.485 in12.3 mm
tfFlange thickness0.78 in19.8 mm
kDesign value1.38 in35.1 mm
kDetailing value2 1/16 in52.4 mm
k1Detailing value1 7/16 in36.5 mm
WWeight99 lb/ft147.3 kg/m
AArea29.1 in²18,774 mm²
IxMoment of inertia, strong axis1,110 in⁴46,201.7 cm⁴
ZxPlastic modulus, strong axis173 in³2,835 cm³
SxSection modulus, strong axis157 in³2,572.8 cm³
rxRadius of gyration, strong axis6.17 in156.7 mm
IyMoment of inertia, weak axis402 in⁴16,732.5 cm⁴
ZyPlastic modulus, weak axis83.6 in³1,370 cm³
SySection modulus, weak axis55.2 in³904.6 cm³
ryRadius of gyration, weak axis3.71 in94.2 mm
JTorsional constant5.37 in⁴223.52 cm⁴
bf/2tfFlange slenderness9.34
h/twWeb slenderness23.5
Metric designationW360×147

Also known as

W360×147

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.