W12×106 Beam Dimensions & Properties

W Shapes (AISC) · W12: 12 in nominal depth

W12×106 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 12.9 in (327.7 mm) deep with a 12.2 in (309.9 mm) flange, a 0.61 in (15.5 mm) web and a 0.99 in (25.1 mm) flange, and weighs 106 lb/ft (157.7 kg/m). Area 31.2 in² (20,129 mm²); strong-axis Ix = 933 in⁴ (38,834.4 cm⁴), Sx = 145 in³ (2,376.1 cm³), Zx = 164 in³ (2,687.5 cm³).

dDepth
327.7 mm12.9 in12.9 in327.7 mm
bfFlange width
309.9 mm12.2 in12.2 in309.9 mm
twWeb thickness
15.5 mm0.61 in0.61 in15.5 mm
tfFlange thickness
25.1 mm0.99 in0.99 in25.1 mm

Drawing

309.9 mm12.2 in327.7 mm12.9 intf 25.1 mmtf 0.99 intw 15.5 mmtw 0.61 ink 40.4 mmk 1.59 in
Drawn to scale · Dimensions in mmDimensions in inches

W12×106 specifications

dDepth12.9 in327.7 mm
bfFlange width12.2 in309.9 mm
twWeb thickness0.61 in15.5 mm
tfFlange thickness0.99 in25.1 mm
kDesign value1.59 in40.4 mm
kDetailing value1 7/8 in47.6 mm
k1Detailing value1 1/8 in28.6 mm
WWeight106 lb/ft157.7 kg/m
AArea31.2 in²20,129 mm²
IxMoment of inertia, strong axis933 in⁴38,834.4 cm⁴
ZxPlastic modulus, strong axis164 in³2,687.5 cm³
SxSection modulus, strong axis145 in³2,376.1 cm³
rxRadius of gyration, strong axis5.47 in138.9 mm
IyMoment of inertia, weak axis301 in⁴12,528.6 cm⁴
ZyPlastic modulus, weak axis75.1 in³1,230.7 cm³
SySection modulus, weak axis49.3 in³807.9 cm³
ryRadius of gyration, weak axis3.11 in79.0 mm
JTorsional constant9.13 in⁴380.02 cm⁴
bf/2tfFlange slenderness6.17
h/twWeb slenderness15.9
Metric designationW310×158

Also known as

W310×158

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.