W30×191 Beam Dimensions & Properties

W Shapes (AISC) · W30: 30 in nominal depth

W30×191 is an AISC wide-flange shape (W30: 30 in nominal depth). It is 30.7 in (779.8 mm) deep with a 15 in (381.0 mm) flange, a 0.71 in (18.0 mm) web and a 1.19 in (30.2 mm) flange, and weighs 191 lb/ft (284.2 kg/m). Area 56.1 in² (36,193 mm²); strong-axis Ix = 9,200 in⁴ (382,932.9 cm⁴), Sx = 600 in³ (9,832.2 cm³), Zx = 675 in³ (11,061.3 cm³).

dDepth
779.8 mm30.7 in30.7 in779.8 mm
bfFlange width
381.0 mm15 in15 in381.0 mm
twWeb thickness
18.0 mm0.71 in0.71 in18.0 mm
tfFlange thickness
30.2 mm1.19 in1.19 in30.2 mm

Drawing

381.0 mm15 in779.8 mm30.7 intf 30.2 mmtf 1.19 intw 18.0 mmtw 0.71 ink 50.0 mmk 1.97 in
Drawn to scale · Dimensions in mmDimensions in inches

W30×191 specifications

dDepth30.7 in779.8 mm
bfFlange width15 in381.0 mm
twWeb thickness0.71 in18.0 mm
tfFlange thickness1.19 in30.2 mm
kDesign value1.97 in50.0 mm
kDetailing value2 1/2 in63.5 mm
k1Detailing value1 9/16 in39.7 mm
WWeight191 lb/ft284.2 kg/m
AArea56.1 in²36,193 mm²
IxMoment of inertia, strong axis9,200 in⁴382,932.9 cm⁴
ZxPlastic modulus, strong axis675 in³11,061.3 cm³
SxSection modulus, strong axis600 in³9,832.2 cm³
rxRadius of gyration, strong axis12.8 in325.1 mm
IyMoment of inertia, weak axis673 in⁴28,012.4 cm⁴
ZyPlastic modulus, weak axis138 in³2,261.4 cm³
SySection modulus, weak axis89.5 in³1,466.6 cm³
ryRadius of gyration, weak axis3.46 in87.9 mm
JTorsional constant21 in⁴874.09 cm⁴
bf/2tfFlange slenderness6.35
h/twWeb slenderness37.7
Metric designationW760×284

Also known as

W760×284

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.