W24×192 Beam Dimensions & Properties

W Shapes (AISC) · W24: 24 in nominal depth

W24×192 is an AISC wide-flange shape (W24: 24 in nominal depth). It is 25.5 in (647.7 mm) deep with a 13 in (330.2 mm) flange, a 0.81 in (20.6 mm) web and a 1.46 in (37.1 mm) flange, and weighs 192 lb/ft (285.7 kg/m). Area 56.5 in² (36,452 mm²); strong-axis Ix = 6,260 in⁴ (260,560.9 cm⁴), Sx = 491 in³ (8,046 cm³), Zx = 559 in³ (9,160.4 cm³).

dDepth
647.7 mm25.5 in25.5 in647.7 mm
bfFlange width
330.2 mm13 in13 in330.2 mm
twWeb thickness
20.6 mm0.81 in0.81 in20.6 mm
tfFlange thickness
37.1 mm1.46 in1.46 in37.1 mm

Drawing

330.2 mm13 in647.7 mm25.5 intf 37.1 mmtf 1.46 intw 20.6 mmtw 0.81 ink 49.8 mmk 1.96 in
Drawn to scale · Dimensions in mmDimensions in inches

W24×192 specifications

dDepth25.5 in647.7 mm
bfFlange width13 in330.2 mm
twWeb thickness0.81 in20.6 mm
tfFlange thickness1.46 in37.1 mm
kDesign value1.96 in49.8 mm
kDetailing value2 3/4 in69.9 mm
k1Detailing value1 5/8 in41.3 mm
WWeight192 lb/ft285.7 kg/m
AArea56.5 in²36,452 mm²
IxMoment of inertia, strong axis6,260 in⁴260,560.9 cm⁴
ZxPlastic modulus, strong axis559 in³9,160.4 cm³
SxSection modulus, strong axis491 in³8,046 cm³
rxRadius of gyration, strong axis10.5 in266.7 mm
IyMoment of inertia, weak axis530 in⁴22,060.3 cm⁴
ZyPlastic modulus, weak axis126 in³2,064.8 cm³
SySection modulus, weak axis81.8 in³1,340.5 cm³
ryRadius of gyration, weak axis3.07 in78.0 mm
JTorsional constant30.8 in⁴1,281.99 cm⁴
bf/2tfFlange slenderness4.43
h/twWeb slenderness26.6
Metric designationW610×285

Also known as

W610×285

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.