W14×311 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×311 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 17.1 in (434.3 mm) deep with a 16.2 in (411.5 mm) flange, a 1.41 in (35.8 mm) web and a 2.26 in (57.4 mm) flange, and weighs 311 lb/ft (462.8 kg/m). Area 91.4 in² (58,968 mm²); strong-axis Ix = 4,330 in⁴ (180,228.2 cm⁴), Sx = 506 in³ (8,291.9 cm³), Zx = 603 in³ (9,881.4 cm³).

dDepth
434.3 mm17.1 in17.1 in434.3 mm
bfFlange width
411.5 mm16.2 in16.2 in411.5 mm
twWeb thickness
35.8 mm1.41 in1.41 in35.8 mm
tfFlange thickness
57.4 mm2.26 in2.26 in57.4 mm

Drawing

411.5 mm16.2 in434.3 mm17.1 intf 57.4 mmtf 2.26 intw 35.8 mmtw 1.41 ink 72.6 mmk 2.86 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×311 specifications

dDepth17.1 in434.3 mm
bfFlange width16.2 in411.5 mm
twWeb thickness1.41 in35.8 mm
tfFlange thickness2.26 in57.4 mm
kDesign value2.86 in72.6 mm
kDetailing value3 9/16 in90.5 mm
k1Detailing value1 15/16 in49.2 mm
WWeight311 lb/ft462.8 kg/m
AArea91.4 in²58,968 mm²
IxMoment of inertia, strong axis4,330 in⁴180,228.2 cm⁴
ZxPlastic modulus, strong axis603 in³9,881.4 cm³
SxSection modulus, strong axis506 in³8,291.9 cm³
rxRadius of gyration, strong axis6.88 in174.8 mm
IyMoment of inertia, weak axis1,610 in⁴67,013.3 cm⁴
ZyPlastic modulus, weak axis304 in³4,981.7 cm³
SySection modulus, weak axis199 in³3,261 cm³
ryRadius of gyration, weak axis4.2 in106.7 mm
JTorsional constant136 in⁴5,660.75 cm⁴
bf/2tfFlange slenderness3.59
h/twWeb slenderness8.1
Metric designationW360×463

Also known as

W360×463

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.