W33×318 Beam Dimensions & Properties

W Shapes (AISC) · W33: 33 in nominal depth

W33×318 is an AISC wide-flange shape (W33: 33 in nominal depth). It is 35.2 in (894.1 mm) deep with a 16 in (406.4 mm) flange, a 1.04 in (26.4 mm) web and a 1.89 in (48.0 mm) flange, and weighs 318 lb/ft (473.2 kg/m). Area 93.7 in² (60,451 mm²); strong-axis Ix = 19,500 in⁴ (811,651.3 cm⁴), Sx = 1,110 in³ (18,189.6 cm³), Zx = 1,270 in³ (20,811.6 cm³).

dDepth
894.1 mm35.2 in35.2 in894.1 mm
bfFlange width
406.4 mm16 in16 in406.4 mm
twWeb thickness
26.4 mm1.04 in1.04 in26.4 mm
tfFlange thickness
48.0 mm1.89 in1.89 in48.0 mm

Drawing

406.4 mm16 in894.1 mm35.2 intf 48.0 mmtf 1.89 intw 26.4 mmtw 1.04 ink 68.1 mmk 2.68 in
Drawn to scale · Dimensions in mmDimensions in inches

W33×318 specifications

dDepth35.2 in894.1 mm
bfFlange width16 in406.4 mm
twWeb thickness1.04 in26.4 mm
tfFlange thickness1.89 in48.0 mm
kDesign value2.68 in68.1 mm
kDetailing value3 3/16 in81.0 mm
k1Detailing value1 3/4 in44.4 mm
WWeight318 lb/ft473.2 kg/m
AArea93.7 in²60,451 mm²
IxMoment of inertia, strong axis19,500 in⁴811,651.3 cm⁴
ZxPlastic modulus, strong axis1,270 in³20,811.6 cm³
SxSection modulus, strong axis1,110 in³18,189.6 cm³
rxRadius of gyration, strong axis14.5 in368.3 mm
IyMoment of inertia, weak axis1,290 in⁴53,693.9 cm⁴
ZyPlastic modulus, weak axis250 in³4,096.8 cm³
SySection modulus, weak axis161 in³2,638.3 cm³
ryRadius of gyration, weak axis3.71 in94.2 mm
JTorsional constant84.4 in⁴3,512.99 cm⁴
bf/2tfFlange slenderness4.23
h/twWeb slenderness28.7
Metric designationW840×473

Also known as

W840×473

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.