W27×307 Beam Dimensions & Properties
W Shapes (AISC) · W27: 27 in nominal depth
W27×307 is an AISC wide-flange shape (W27: 27 in nominal depth). It is 29.6 in (751.8 mm) deep with a 14.4 in (365.8 mm) flange, a 1.16 in (29.5 mm) web and a 2.09 in (53.1 mm) flange, and weighs 307 lb/ft (456.9 kg/m). Area 90.2 in² (58,193 mm²); strong-axis Ix = 13,100 in⁴ (545,263.2 cm⁴), Sx = 887 in³ (14,535.3 cm³), Zx = 1,030 in³ (16,878.7 cm³).
- dDepth
- 751.8 mm29.6 in29.6 in751.8 mm
- bfFlange width
- 365.8 mm14.4 in14.4 in365.8 mm
- twWeb thickness
- 29.5 mm1.16 in1.16 in29.5 mm
- tfFlange thickness
- 53.1 mm2.09 in2.09 in53.1 mm
Drawing
W27×307 specifications
| dDepth | 29.6 in751.8 mm |
|---|---|
| bfFlange width | 14.4 in365.8 mm |
| twWeb thickness | 1.16 in29.5 mm |
| tfFlange thickness | 2.09 in53.1 mm |
| kDesign value | 2.88 in73.2 mm |
| kDetailing value | 3 5/16 in84.1 mm |
| k1Detailing value | 1 13/16 in46.0 mm |
| WWeight | 307 lb/ft456.9 kg/m |
| AArea | 90.2 in²58,193 mm² |
| IxMoment of inertia, strong axis | 13,100 in⁴545,263.2 cm⁴ |
| ZxPlastic modulus, strong axis | 1,030 in³16,878.7 cm³ |
| SxSection modulus, strong axis | 887 in³14,535.3 cm³ |
| rxRadius of gyration, strong axis | 12 in304.8 mm |
| IyMoment of inertia, weak axis | 1,050 in⁴43,704.3 cm⁴ |
| ZyPlastic modulus, weak axis | 227 in³3,719.9 cm³ |
| SySection modulus, weak axis | 146 in³2,392.5 cm³ |
| ryRadius of gyration, weak axis | 3.41 in86.6 mm |
| JTorsional constant | 101 in⁴4,203.94 cm⁴ |
| bf/2tfFlange slenderness | 3.46 |
| h/twWeb slenderness | 20.6 |
| Metric designation | W690×457 |
Also known as
W690×457
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.