W36×302 Beam Dimensions & Properties

W Shapes (AISC) · W36: 36 in nominal depth

W36×302 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 37.3 in (947.4 mm) deep with a 16.7 in (424.2 mm) flange, a 0.945 in (24.0 mm) web and a 1.68 in (42.7 mm) flange, and weighs 302 lb/ft (449.4 kg/m). Area 89 in² (57,419 mm²); strong-axis Ix = 21,100 in⁴ (878,248.3 cm⁴), Sx = 1,130 in³ (18,517.4 cm³), Zx = 1,280 in³ (20,975.4 cm³).

dDepth
947.4 mm37.3 in37.3 in947.4 mm
bfFlange width
424.2 mm16.7 in16.7 in424.2 mm
twWeb thickness
24.0 mm0.945 in0.945 in24.0 mm
tfFlange thickness
42.7 mm1.68 in1.68 in42.7 mm

Drawing

424.2 mm16.7 in947.4 mm37.3 intf 42.7 mmtf 1.68 intw 24.0 mmtw 0.945 ink 66.8 mmk 2.63 in
Drawn to scale · Dimensions in mmDimensions in inches

W36×302 specifications

dDepth37.3 in947.4 mm
bfFlange width16.7 in424.2 mm
twWeb thickness0.945 in24.0 mm
tfFlange thickness1.68 in42.7 mm
kDesign value2.63 in66.8 mm
kDetailing value3 in76.2 mm
k1Detailing value1 11/16 in42.9 mm
WWeight302 lb/ft449.4 kg/m
AArea89 in²57,419 mm²
IxMoment of inertia, strong axis21,100 in⁴878,248.3 cm⁴
ZxPlastic modulus, strong axis1,280 in³20,975.4 cm³
SxSection modulus, strong axis1,130 in³18,517.4 cm³
rxRadius of gyration, strong axis15.4 in391.2 mm
IyMoment of inertia, weak axis1,300 in⁴54,110.1 cm⁴
ZyPlastic modulus, weak axis241 in³3,949.3 cm³
SySection modulus, weak axis156 in³2,556.4 cm³
ryRadius of gyration, weak axis3.82 in97.0 mm
JTorsional constant64.3 in⁴2,676.37 cm⁴
bf/2tfFlange slenderness4.96
h/twWeb slenderness33.9
Metric designationW920×449

Also known as

W920×449

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.