W18×311 Beam Dimensions & Properties

W Shapes (AISC) · W18: 18 in nominal depth

W18×311 is an AISC wide-flange shape (W18: 18 in nominal depth). It is 22.3 in (566.4 mm) deep with a 12 in (304.8 mm) flange, a 1.52 in (38.6 mm) web and a 2.74 in (69.6 mm) flange, and weighs 311 lb/ft (462.8 kg/m). Area 91.6 in² (59,097 mm²); strong-axis Ix = 6,970 in⁴ (290,113.3 cm⁴), Sx = 624 in³ (10,225.5 cm³), Zx = 754 in³ (12,355.8 cm³).

dDepth
566.4 mm22.3 in22.3 in566.4 mm
bfFlange width
304.8 mm12 in12 in304.8 mm
twWeb thickness
38.6 mm1.52 in1.52 in38.6 mm
tfFlange thickness
69.6 mm2.74 in2.74 in69.6 mm

Drawing

304.8 mm12 in566.4 mm22.3 intf 69.6 mmtf 2.74 intw 38.6 mmtw 1.52 ink 82.3 mmk 3.24 in
Drawn to scale · Dimensions in mmDimensions in inches

W18×311 specifications

dDepth22.3 in566.4 mm
bfFlange width12 in304.8 mm
twWeb thickness1.52 in38.6 mm
tfFlange thickness2.74 in69.6 mm
kDesign value3.24 in82.3 mm
kDetailing value3 9/16 in90.5 mm
k1Detailing value1 9/16 in39.7 mm
WWeight311 lb/ft462.8 kg/m
AArea91.6 in²59,097 mm²
IxMoment of inertia, strong axis6,970 in⁴290,113.3 cm⁴
ZxPlastic modulus, strong axis754 in³12,355.8 cm³
SxSection modulus, strong axis624 in³10,225.5 cm³
rxRadius of gyration, strong axis8.72 in221.5 mm
IyMoment of inertia, weak axis795 in⁴33,090.4 cm⁴
ZyPlastic modulus, weak axis207 in³3,392.1 cm³
SySection modulus, weak axis132 in³2,163.1 cm³
ryRadius of gyration, weak axis2.95 in74.9 mm
JTorsional constant176 in⁴7,325.67 cm⁴
bf/2tfFlange slenderness2.19
h/twWeb slenderness10.4
Metric designationW460×464

Also known as

W460×464

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.