W36×318 Beam Dimensions & Properties
W Shapes (AISC) · W36: 36 in nominal depth
W36×318 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 38.2 in (970.3 mm) deep with a 12.4 in (315.0 mm) flange, a 1.18 in (30.0 mm) web and a 2.13 in (54.1 mm) flange, and weighs 318 lb/ft (473.2 kg/m). Area 93.4 in² (60,258 mm²); strong-axis Ix = 21,200 in⁴ (882,410.6 cm⁴), Sx = 1,110 in³ (18,189.6 cm³), Zx = 1,300 in³ (21,303.2 cm³).
- dDepth
- 970.3 mm38.2 in38.2 in970.3 mm
- bfFlange width
- 315.0 mm12.4 in12.4 in315.0 mm
- twWeb thickness
- 30.0 mm1.18 in1.18 in30.0 mm
- tfFlange thickness
- 54.1 mm2.13 in2.13 in54.1 mm
Drawing
W36×318 specifications
| dDepth | 38.2 in970.3 mm |
|---|---|
| bfFlange width | 12.4 in315.0 mm |
| twWeb thickness | 1.18 in30.0 mm |
| tfFlange thickness | 2.13 in54.1 mm |
| kDesign value | 2.88 in73.2 mm |
| kDetailing value | 3 3/8 in85.7 mm |
| k1Detailing value | 1 13/16 in46.0 mm |
| WWeight | 318 lb/ft473.2 kg/m |
| AArea | 93.4 in²60,258 mm² |
| IxMoment of inertia, strong axis | 21,200 in⁴882,410.6 cm⁴ |
| ZxPlastic modulus, strong axis | 1,300 in³21,303.2 cm³ |
| SxSection modulus, strong axis | 1,110 in³18,189.6 cm³ |
| rxRadius of gyration, strong axis | 15.1 in383.5 mm |
| IyMoment of inertia, weak axis | 682 in⁴28,387 cm⁴ |
| ZyPlastic modulus, weak axis | 176 in³2,884.1 cm³ |
| SySection modulus, weak axis | 110 in³1,802.6 cm³ |
| ryRadius of gyration, weak axis | 2.7 in68.6 mm |
| JTorsional constant | 98.3 in⁴4,091.55 cm⁴ |
| bf/2tfFlange slenderness | 2.91 |
| h/twWeb slenderness | 27.5 |
| Metric designation | W920×474 |
Also known as
W920×474
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.