W36×350 Beam Dimensions & Properties
W Shapes (AISC) · W36: 36 in nominal depth
W36×350 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 38.6 in (980.4 mm) deep with a 12.6 in (320.0 mm) flange, a 1.3 in (33.0 mm) web and a 2.32 in (58.9 mm) flange, and weighs 350 lb/ft (520.9 kg/m). Area 103 in² (66,451 mm²); strong-axis Ix = 23,600 in⁴ (982,306.2 cm⁴), Sx = 1,220 in³ (19,992.2 cm³), Zx = 1,440 in³ (23,597.4 cm³).
- dDepth
- 980.4 mm38.6 in38.6 in980.4 mm
- bfFlange width
- 320.0 mm12.6 in12.6 in320.0 mm
- twWeb thickness
- 33.0 mm1.3 in1.3 in33.0 mm
- tfFlange thickness
- 58.9 mm2.32 in2.32 in58.9 mm
Drawing
W36×350 specifications
| dDepth | 38.6 in980.4 mm |
|---|---|
| bfFlange width | 12.6 in320.0 mm |
| twWeb thickness | 1.3 in33.0 mm |
| tfFlange thickness | 2.32 in58.9 mm |
| kDesign value | 3.07 in78.0 mm |
| kDetailing value | 3 9/16 in90.5 mm |
| k1Detailing value | 1 7/8 in47.6 mm |
| WWeight | 350 lb/ft520.9 kg/m |
| AArea | 103 in²66,451 mm² |
| IxMoment of inertia, strong axis | 23,600 in⁴982,306.2 cm⁴ |
| ZxPlastic modulus, strong axis | 1,440 in³23,597.4 cm³ |
| SxSection modulus, strong axis | 1,220 in³19,992.2 cm³ |
| rxRadius of gyration, strong axis | 15.1 in383.5 mm |
| IyMoment of inertia, weak axis | 780 in⁴32,466.1 cm⁴ |
| ZyPlastic modulus, weak axis | 199 in³3,261 cm³ |
| SySection modulus, weak axis | 124 in³2,032 cm³ |
| ryRadius of gyration, weak axis | 2.75 in69.9 mm |
| JTorsional constant | 129 in⁴5,369.39 cm⁴ |
| bf/2tfFlange slenderness | 2.72 |
| h/twWeb slenderness | 25 |
| Metric designation | W920×521 |
Also known as
W920×521
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.