W33×354 Beam Dimensions & Properties
W Shapes (AISC) · W33: 33 in nominal depth
W33×354 is an AISC wide-flange shape (W33: 33 in nominal depth). It is 35.6 in (904.2 mm) deep with a 16.1 in (408.9 mm) flange, a 1.16 in (29.5 mm) web and a 2.09 in (53.1 mm) flange, and weighs 354 lb/ft (526.8 kg/m). Area 104 in² (67,097 mm²); strong-axis Ix = 22,000 in⁴ (915,709.1 cm⁴), Sx = 1,240 in³ (20,320 cm³), Zx = 1,420 in³ (23,269.6 cm³).
- dDepth
- 904.2 mm35.6 in35.6 in904.2 mm
- bfFlange width
- 408.9 mm16.1 in16.1 in408.9 mm
- twWeb thickness
- 29.5 mm1.16 in1.16 in29.5 mm
- tfFlange thickness
- 53.1 mm2.09 in2.09 in53.1 mm
Drawing
W33×354 specifications
| dDepth | 35.6 in904.2 mm |
|---|---|
| bfFlange width | 16.1 in408.9 mm |
| twWeb thickness | 1.16 in29.5 mm |
| tfFlange thickness | 2.09 in53.1 mm |
| kDesign value | 2.88 in73.2 mm |
| kDetailing value | 3 3/8 in85.7 mm |
| k1Detailing value | 1 13/16 in46.0 mm |
| WWeight | 354 lb/ft526.8 kg/m |
| AArea | 104 in²67,097 mm² |
| IxMoment of inertia, strong axis | 22,000 in⁴915,709.1 cm⁴ |
| ZxPlastic modulus, strong axis | 1,420 in³23,269.6 cm³ |
| SxSection modulus, strong axis | 1,240 in³20,320 cm³ |
| rxRadius of gyration, strong axis | 14.5 in368.3 mm |
| IyMoment of inertia, weak axis | 1,460 in⁴60,769.8 cm⁴ |
| ZyPlastic modulus, weak axis | 282 in³4,621.2 cm³ |
| SySection modulus, weak axis | 181 in³2,966.1 cm³ |
| ryRadius of gyration, weak axis | 3.74 in95.0 mm |
| JTorsional constant | 115 in⁴4,786.66 cm⁴ |
| bf/2tfFlange slenderness | 3.85 |
| h/twWeb slenderness | 25.7 |
| Metric designation | W840×527 |
Also known as
W840×527
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.