W16×100 Beam Dimensions & Properties

W Shapes (AISC) · W16: 16 in nominal depth

W16×100 is an AISC wide-flange shape (W16: 16 in nominal depth). It is 17 in (431.8 mm) deep with a 10.4 in (264.2 mm) flange, a 0.585 in (14.9 mm) web and a 0.985 in (25.0 mm) flange, and weighs 100 lb/ft (148.8 kg/m). Area 29.4 in² (18,968 mm²); strong-axis Ix = 1,490 in⁴ (62,018.5 cm⁴), Sx = 175 in³ (2,867.7 cm³), Zx = 198 in³ (3,244.6 cm³).

dDepth
431.8 mm17 in17 in431.8 mm
bfFlange width
264.2 mm10.4 in10.4 in264.2 mm
twWeb thickness
14.9 mm0.585 in0.585 in14.9 mm
tfFlange thickness
25.0 mm0.985 in0.985 in25.0 mm

Drawing

264.2 mm10.4 in431.8 mm17 intf 25.0 mmtf 0.985 intw 14.9 mmtw 0.585 ink 35.3 mmk 1.39 in
Drawn to scale · Dimensions in mmDimensions in inches

W16×100 specifications

dDepth17 in431.8 mm
bfFlange width10.4 in264.2 mm
twWeb thickness0.585 in14.9 mm
tfFlange thickness0.985 in25.0 mm
kDesign value1.39 in35.3 mm
kDetailing value1 7/8 in47.6 mm
k1Detailing value1 1/8 in28.6 mm
WWeight100 lb/ft148.8 kg/m
AArea29.4 in²18,968 mm²
IxMoment of inertia, strong axis1,490 in⁴62,018.5 cm⁴
ZxPlastic modulus, strong axis198 in³3,244.6 cm³
SxSection modulus, strong axis175 in³2,867.7 cm³
rxRadius of gyration, strong axis7.1 in180.3 mm
IyMoment of inertia, weak axis186 in⁴7,741.9 cm⁴
ZyPlastic modulus, weak axis54.9 in³899.6 cm³
SySection modulus, weak axis35.7 in³585 cm³
ryRadius of gyration, weak axis2.51 in63.8 mm
JTorsional constant7.73 in⁴321.75 cm⁴
bf/2tfFlange slenderness5.29
h/twWeb slenderness24.3
Metric designationW410×149

Also known as

W410×149

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.