W12×152 Beam Dimensions & Properties

W Shapes (AISC) · W12: 12 in nominal depth

W12×152 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 13.7 in (348.0 mm) deep with a 12.5 in (317.5 mm) flange, a 0.87 in (22.1 mm) web and a 1.4 in (35.6 mm) flange, and weighs 152 lb/ft (226.2 kg/m). Area 44.7 in² (28,839 mm²); strong-axis Ix = 1,430 in⁴ (59,521.1 cm⁴), Sx = 209 in³ (3,424.9 cm³), Zx = 243 in³ (3,982.1 cm³).

dDepth
348.0 mm13.7 in13.7 in348.0 mm
bfFlange width
317.5 mm12.5 in12.5 in317.5 mm
twWeb thickness
22.1 mm0.87 in0.87 in22.1 mm
tfFlange thickness
35.6 mm1.4 in1.4 in35.6 mm

Drawing

317.5 mm12.5 in348.0 mm13.7 intf 35.6 mmtf 1.4 intw 22.1 mmtw 0.87 ink 50.8 mmk 2 in
Drawn to scale · Dimensions in mmDimensions in inches

W12×152 specifications

dDepth13.7 in348.0 mm
bfFlange width12.5 in317.5 mm
twWeb thickness0.87 in22.1 mm
tfFlange thickness1.4 in35.6 mm
kDesign value2 in50.8 mm
kDetailing value2 5/16 in58.7 mm
k1Detailing value1 1/4 in31.8 mm
WWeight152 lb/ft226.2 kg/m
AArea44.7 in²28,839 mm²
IxMoment of inertia, strong axis1,430 in⁴59,521.1 cm⁴
ZxPlastic modulus, strong axis243 in³3,982.1 cm³
SxSection modulus, strong axis209 in³3,424.9 cm³
rxRadius of gyration, strong axis5.66 in143.8 mm
IyMoment of inertia, weak axis454 in⁴18,896.9 cm⁴
ZyPlastic modulus, weak axis111 in³1,819 cm³
SySection modulus, weak axis72.8 in³1,193 cm³
ryRadius of gyration, weak axis3.19 in81.0 mm
JTorsional constant25.8 in⁴1,073.88 cm⁴
bf/2tfFlange slenderness4.46
h/twWeb slenderness11.2
Metric designationW310×226

Also known as

W310×226

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.