W18×283 Beam Dimensions & Properties

W Shapes (AISC) · W18: 18 in nominal depth

W18×283 is an AISC wide-flange shape (W18: 18 in nominal depth). It is 21.9 in (556.3 mm) deep with a 11.9 in (302.3 mm) flange, a 1.4 in (35.6 mm) web and a 2.5 in (63.5 mm) flange, and weighs 283 lb/ft (421.2 kg/m). Area 83.3 in² (53,742 mm²); strong-axis Ix = 6,170 in⁴ (256,814.8 cm⁴), Sx = 565 in³ (9,258.7 cm³), Zx = 676 in³ (11,077.7 cm³).

dDepth
556.3 mm21.9 in21.9 in556.3 mm
bfFlange width
302.3 mm11.9 in11.9 in302.3 mm
twWeb thickness
35.6 mm1.4 in1.4 in35.6 mm
tfFlange thickness
63.5 mm2.5 in2.5 in63.5 mm

Drawing

302.3 mm11.9 in556.3 mm21.9 intf 63.5 mmtf 2.5 intw 35.6 mmtw 1.4 ink 76.2 mmk 3 in
Drawn to scale · Dimensions in mmDimensions in inches

W18×283 specifications

dDepth21.9 in556.3 mm
bfFlange width11.9 in302.3 mm
twWeb thickness1.4 in35.6 mm
tfFlange thickness2.5 in63.5 mm
kDesign value3 in76.2 mm
kDetailing value3 3/8 in85.7 mm
k1Detailing value1 1/2 in38.1 mm
WWeight283 lb/ft421.2 kg/m
AArea83.3 in²53,742 mm²
IxMoment of inertia, strong axis6,170 in⁴256,814.8 cm⁴
ZxPlastic modulus, strong axis676 in³11,077.7 cm³
SxSection modulus, strong axis565 in³9,258.7 cm³
rxRadius of gyration, strong axis8.61 in218.7 mm
IyMoment of inertia, weak axis704 in⁴29,302.7 cm⁴
ZyPlastic modulus, weak axis185 in³3,031.6 cm³
SySection modulus, weak axis118 in³1,933.7 cm³
ryRadius of gyration, weak axis2.91 in73.9 mm
JTorsional constant134 in⁴5,577.5 cm⁴
bf/2tfFlange slenderness2.38
h/twWeb slenderness11.3
Metric designationW460×421

Also known as

W460×421

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.