W21×132 Beam Dimensions & Properties

W Shapes (AISC) · W21: 21 in nominal depth

W21×132 is an AISC wide-flange shape (W21: 21 in nominal depth). It is 21.8 in (553.7 mm) deep with a 12.4 in (315.0 mm) flange, a 0.65 in (16.5 mm) web and a 1.04 in (26.4 mm) flange, and weighs 132 lb/ft (196.4 kg/m). Area 38.8 in² (25,032 mm²); strong-axis Ix = 3,220 in⁴ (134,026.5 cm⁴), Sx = 295 in³ (4,834.2 cm³), Zx = 333 in³ (5,456.9 cm³).

dDepth
553.7 mm21.8 in21.8 in553.7 mm
bfFlange width
315.0 mm12.4 in12.4 in315.0 mm
twWeb thickness
16.5 mm0.65 in0.65 in16.5 mm
tfFlange thickness
26.4 mm1.04 in1.04 in26.4 mm

Drawing

315.0 mm12.4 in553.7 mm21.8 intf 26.4 mmtf 1.04 intw 16.5 mmtw 0.65 ink 39.1 mmk 1.54 in
Drawn to scale · Dimensions in mmDimensions in inches

W21×132 specifications

dDepth21.8 in553.7 mm
bfFlange width12.4 in315.0 mm
twWeb thickness0.65 in16.5 mm
tfFlange thickness1.04 in26.4 mm
kDesign value1.54 in39.1 mm
kDetailing value2 1/4 in57.2 mm
k1Detailing value1 9/16 in39.7 mm
WWeight132 lb/ft196.4 kg/m
AArea38.8 in²25,032 mm²
IxMoment of inertia, strong axis3,220 in⁴134,026.5 cm⁴
ZxPlastic modulus, strong axis333 in³5,456.9 cm³
SxSection modulus, strong axis295 in³4,834.2 cm³
rxRadius of gyration, strong axis9.12 in231.6 mm
IyMoment of inertia, weak axis333 in⁴13,860.5 cm⁴
ZyPlastic modulus, weak axis82.3 in³1,348.7 cm³
SySection modulus, weak axis53.5 in³876.7 cm³
ryRadius of gyration, weak axis2.93 in74.4 mm
JTorsional constant11.3 in⁴470.34 cm⁴
bf/2tfFlange slenderness6.01
h/twWeb slenderness28.9
Metric designationW530×196

Also known as

W530×196

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.