W18×119 Beam Dimensions & Properties

W Shapes (AISC) · W18: 18 in nominal depth

W18×119 is an AISC wide-flange shape (W18: 18 in nominal depth). It is 19 in (482.6 mm) deep with a 11.3 in (287.0 mm) flange, a 0.655 in (16.6 mm) web and a 1.06 in (26.9 mm) flange, and weighs 119 lb/ft (177.1 kg/m). Area 35.1 in² (22,645 mm²); strong-axis Ix = 2,190 in⁴ (91,154.7 cm⁴), Sx = 231 in³ (3,785.4 cm³), Zx = 262 in³ (4,293.4 cm³).

dDepth
482.6 mm19 in19 in482.6 mm
bfFlange width
287.0 mm11.3 in11.3 in287.0 mm
twWeb thickness
16.6 mm0.655 in0.655 in16.6 mm
tfFlange thickness
26.9 mm1.06 in1.06 in26.9 mm

Drawing

287.0 mm11.3 in482.6 mm19 intf 26.9 mmtf 1.06 intw 16.6 mmtw 0.655 ink 37.1 mmk 1.46 in
Drawn to scale · Dimensions in mmDimensions in inches

W18×119 specifications

dDepth19 in482.6 mm
bfFlange width11.3 in287.0 mm
twWeb thickness0.655 in16.6 mm
tfFlange thickness1.06 in26.9 mm
kDesign value1.46 in37.1 mm
kDetailing value1 15/16 in49.2 mm
k1Detailing value1 3/16 in30.2 mm
WWeight119 lb/ft177.1 kg/m
AArea35.1 in²22,645 mm²
IxMoment of inertia, strong axis2,190 in⁴91,154.7 cm⁴
ZxPlastic modulus, strong axis262 in³4,293.4 cm³
SxSection modulus, strong axis231 in³3,785.4 cm³
rxRadius of gyration, strong axis7.9 in200.7 mm
IyMoment of inertia, weak axis253 in⁴10,530.7 cm⁴
ZyPlastic modulus, weak axis69.1 in³1,132.3 cm³
SySection modulus, weak axis44.9 in³735.8 cm³
ryRadius of gyration, weak axis2.69 in68.3 mm
JTorsional constant10.6 in⁴441.21 cm⁴
bf/2tfFlange slenderness5.31
h/twWeb slenderness24.5
Metric designationW460×177

Also known as

W460×177

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.