W24×370 Beam Dimensions & Properties

W Shapes (AISC) · W24: 24 in nominal depth

W24×370 is an AISC wide-flange shape (W24: 24 in nominal depth). It is 28 in (711.2 mm) deep with a 13.7 in (348.0 mm) flange, a 1.52 in (38.6 mm) web and a 2.72 in (69.1 mm) flange, and weighs 370 lb/ft (550.6 kg/m). Area 109 in² (70,322 mm²); strong-axis Ix = 13,400 in⁴ (557,750.1 cm⁴), Sx = 957 in³ (15,682.4 cm³), Zx = 1,130 in³ (18,517.4 cm³).

dDepth
711.2 mm28 in28 in711.2 mm
bfFlange width
348.0 mm13.7 in13.7 in348.0 mm
twWeb thickness
38.6 mm1.52 in1.52 in38.6 mm
tfFlange thickness
69.1 mm2.72 in2.72 in69.1 mm

Drawing

348.0 mm13.7 in711.2 mm28 intf 69.1 mmtf 2.72 intw 38.6 mmtw 1.52 ink 81.8 mmk 3.22 in
Drawn to scale · Dimensions in mmDimensions in inches

W24×370 specifications

dDepth28 in711.2 mm
bfFlange width13.7 in348.0 mm
twWeb thickness1.52 in38.6 mm
tfFlange thickness2.72 in69.1 mm
kDesign value3.22 in81.8 mm
kDetailing value4 in101.6 mm
k1Detailing value2 in50.8 mm
WWeight370 lb/ft550.6 kg/m
AArea109 in²70,322 mm²
IxMoment of inertia, strong axis13,400 in⁴557,750.1 cm⁴
ZxPlastic modulus, strong axis1,130 in³18,517.4 cm³
SxSection modulus, strong axis957 in³15,682.4 cm³
rxRadius of gyration, strong axis11.1 in281.9 mm
IyMoment of inertia, weak axis1,160 in⁴48,282.8 cm⁴
ZyPlastic modulus, weak axis267 in³4,375.3 cm³
SySection modulus, weak axis170 in³2,785.8 cm³
ryRadius of gyration, weak axis3.27 in83.1 mm
JTorsional constant201 in⁴8,366.25 cm⁴
bf/2tfFlange slenderness2.51
h/twWeb slenderness14.2
Metric designationW610×551

Also known as

W610×551

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.