W24×117 Beam Dimensions & Properties

W Shapes (AISC) · W24: 24 in nominal depth

W24×117 is an AISC wide-flange shape (W24: 24 in nominal depth). It is 24.3 in (617.2 mm) deep with a 12.8 in (325.1 mm) flange, a 0.55 in (14.0 mm) web and a 0.85 in (21.6 mm) flange, and weighs 117 lb/ft (174.1 kg/m). Area 34.4 in² (22,194 mm²); strong-axis Ix = 3,540 in⁴ (147,345.9 cm⁴), Sx = 291 in³ (4,768.6 cm³), Zx = 327 in³ (5,358.6 cm³).

dDepth
617.2 mm24.3 in24.3 in617.2 mm
bfFlange width
325.1 mm12.8 in12.8 in325.1 mm
twWeb thickness
14.0 mm0.55 in0.55 in14.0 mm
tfFlange thickness
21.6 mm0.85 in0.85 in21.6 mm

Drawing

325.1 mm12.8 in617.2 mm24.3 intf 21.6 mmtf 0.85 intw 14.0 mmtw 0.55 ink 34.3 mmk 1.35 in
Drawn to scale · Dimensions in mmDimensions in inches

W24×117 specifications

dDepth24.3 in617.2 mm
bfFlange width12.8 in325.1 mm
twWeb thickness0.55 in14.0 mm
tfFlange thickness0.85 in21.6 mm
kDesign value1.35 in34.3 mm
kDetailing value2 1/8 in54.0 mm
k1Detailing value1 1/2 in38.1 mm
WWeight117 lb/ft174.1 kg/m
AArea34.4 in²22,194 mm²
IxMoment of inertia, strong axis3,540 in⁴147,345.9 cm⁴
ZxPlastic modulus, strong axis327 in³5,358.6 cm³
SxSection modulus, strong axis291 in³4,768.6 cm³
rxRadius of gyration, strong axis10.1 in256.5 mm
IyMoment of inertia, weak axis297 in⁴12,362.1 cm⁴
ZyPlastic modulus, weak axis71.4 in³1,170 cm³
SySection modulus, weak axis46.5 in³762 cm³
ryRadius of gyration, weak axis2.94 in74.7 mm
JTorsional constant6.72 in⁴279.71 cm⁴
bf/2tfFlange slenderness7.53
h/twWeb slenderness39.2
Metric designationW610×174

Also known as

W610×174

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.