W27×129 Beam Dimensions & Properties

W Shapes (AISC) · W27: 27 in nominal depth

W27×129 is an AISC wide-flange shape (W27: 27 in nominal depth). It is 27.6 in (701.0 mm) deep with a 10 in (254.0 mm) flange, a 0.61 in (15.5 mm) web and a 1.1 in (27.9 mm) flange, and weighs 129 lb/ft (192.0 kg/m). Area 37.8 in² (24,387 mm²); strong-axis Ix = 4,760 in⁴ (198,126.2 cm⁴), Sx = 345 in³ (5,653.5 cm³), Zx = 395 in³ (6,472.9 cm³).

dDepth
701.0 mm27.6 in27.6 in701.0 mm
bfFlange width
254.0 mm10 in10 in254.0 mm
twWeb thickness
15.5 mm0.61 in0.61 in15.5 mm
tfFlange thickness
27.9 mm1.1 in1.1 in27.9 mm

Drawing

254.0 mm10 in701.0 mm27.6 intf 27.9 mmtf 1.1 intw 15.5 mmtw 0.61 ink 43.2 mmk 1.7 in
Drawn to scale · Dimensions in mmDimensions in inches

W27×129 specifications

dDepth27.6 in701.0 mm
bfFlange width10 in254.0 mm
twWeb thickness0.61 in15.5 mm
tfFlange thickness1.1 in27.9 mm
kDesign value1.7 in43.2 mm
kDetailing value2 5/16 in58.7 mm
k1Detailing value1 1/2 in38.1 mm
WWeight129 lb/ft192.0 kg/m
AArea37.8 in²24,387 mm²
IxMoment of inertia, strong axis4,760 in⁴198,126.2 cm⁴
ZxPlastic modulus, strong axis395 in³6,472.9 cm³
SxSection modulus, strong axis345 in³5,653.5 cm³
rxRadius of gyration, strong axis11.2 in284.5 mm
IyMoment of inertia, weak axis184 in⁴7,658.7 cm⁴
ZyPlastic modulus, weak axis57.6 in³943.9 cm³
SySection modulus, weak axis36.8 in³603 cm³
ryRadius of gyration, weak axis2.21 in56.1 mm
JTorsional constant11.1 in⁴462.02 cm⁴
bf/2tfFlange slenderness4.55
h/twWeb slenderness39.7
Metric designationW690×192

Also known as

W690×192

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.