W27×235 Beam Dimensions & Properties

W Shapes (AISC) · W27: 27 in nominal depth

W27×235 is an AISC wide-flange shape (W27: 27 in nominal depth). It is 28.7 in (729.0 mm) deep with a 14.2 in (360.7 mm) flange, a 0.91 in (23.1 mm) web and a 1.61 in (40.9 mm) flange, and weighs 235 lb/ft (349.7 kg/m). Area 69.4 in² (44,774 mm²); strong-axis Ix = 9,700 in⁴ (403,744.5 cm⁴), Sx = 677 in³ (11,094 cm³), Zx = 772 in³ (12,650.8 cm³).

dDepth
729.0 mm28.7 in28.7 in729.0 mm
bfFlange width
360.7 mm14.2 in14.2 in360.7 mm
twWeb thickness
23.1 mm0.91 in0.91 in23.1 mm
tfFlange thickness
40.9 mm1.61 in1.61 in40.9 mm

Drawing

360.7 mm14.2 in729.0 mm28.7 intf 40.9 mmtf 1.61 intw 23.1 mmtw 0.91 ink 61.0 mmk 2.4 in
Drawn to scale · Dimensions in mmDimensions in inches

W27×235 specifications

dDepth28.7 in729.0 mm
bfFlange width14.2 in360.7 mm
twWeb thickness0.91 in23.1 mm
tfFlange thickness1.61 in40.9 mm
kDesign value2.4 in61.0 mm
kDetailing value2 7/8 in73.0 mm
k1Detailing value1 11/16 in42.9 mm
WWeight235 lb/ft349.7 kg/m
AArea69.4 in²44,774 mm²
IxMoment of inertia, strong axis9,700 in⁴403,744.5 cm⁴
ZxPlastic modulus, strong axis772 in³12,650.8 cm³
SxSection modulus, strong axis677 in³11,094 cm³
rxRadius of gyration, strong axis11.8 in299.7 mm
IyMoment of inertia, weak axis769 in⁴32,008.2 cm⁴
ZyPlastic modulus, weak axis168 in³2,753 cm³
SySection modulus, weak axis108 in³1,769.8 cm³
ryRadius of gyration, weak axis3.33 in84.6 mm
JTorsional constant47 in⁴1,956.29 cm⁴
bf/2tfFlange slenderness4.41
h/twWeb slenderness26.2
Metric designationW690×350

Also known as

W690×350

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.