W44×230 Beam Dimensions & Properties

W Shapes (AISC) · W44: 44 in nominal depth

W44×230 is an AISC wide-flange shape (W44: 44 in nominal depth). It is 42.9 in (1089.7 mm) deep with a 15.8 in (401.3 mm) flange, a 0.71 in (18.0 mm) web and a 1.22 in (31.0 mm) flange, and weighs 230 lb/ft (342.3 kg/m). Area 67.8 in² (43,742 mm²); strong-axis Ix = 20,800 in⁴ (865,761.4 cm⁴), Sx = 971 in³ (15,911.8 cm³), Zx = 1,100 in³ (18,025.8 cm³).

dDepth
1089.7 mm42.9 in42.9 in1089.7 mm
bfFlange width
401.3 mm15.8 in15.8 in401.3 mm
twWeb thickness
18.0 mm0.71 in0.71 in18.0 mm
tfFlange thickness
31.0 mm1.22 in1.22 in31.0 mm

Drawing

401.3 mm15.8 in1089.7 mm42.9 intf 31.0 mmtf 1.22 intw 18.0 mmtw 0.71 ink 51.1 mmk 2.01 in
Drawn to scale · Dimensions in mmDimensions in inches

W44×230 specifications

dDepth42.9 in1089.7 mm
bfFlange width15.8 in401.3 mm
twWeb thickness0.71 in18.0 mm
tfFlange thickness1.22 in31.0 mm
kDesign value2.01 in51.1 mm
kDetailing value2 7/16 in61.9 mm
k1Detailing value1 9/16 in39.7 mm
WWeight230 lb/ft342.3 kg/m
AArea67.8 in²43,742 mm²
IxMoment of inertia, strong axis20,800 in⁴865,761.4 cm⁴
ZxPlastic modulus, strong axis1,100 in³18,025.8 cm³
SxSection modulus, strong axis971 in³15,911.8 cm³
rxRadius of gyration, strong axis17.5 in444.5 mm
IyMoment of inertia, weak axis796 in⁴33,132 cm⁴
ZyPlastic modulus, weak axis157 in³2,572.8 cm³
SySection modulus, weak axis101 in³1,655.1 cm³
ryRadius of gyration, weak axis3.43 in87.1 mm
JTorsional constant24.9 in⁴1,036.42 cm⁴
bf/2tfFlange slenderness6.45
h/twWeb slenderness54.8
Metric designationW1100×343

Also known as

W1100×343

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.